LoRaWAN Wireless Transmission Iot Based Electricity Energy Meter 220V Smart Meter Solution
Brand Name:TimeWave
Certification:ISO/IEC 20000-1,ISO/IEC 27001,ISO/IEC 9001
Model Number:Type DTZY2397
Minimum Order Quantity:Negotiable
Delivery Time:3-5 weeks after receive the payment
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Wuhan Hubei China
Address:
603,building1,Guanggudingchuanginternational,No.51GuangguAvenue,JiangxiaDistrict,Wuhan,HubeiProvince，China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
LoRaWAN Wireless Transmission Iot Based Electricity Energy Meter 220V Smart Meter Solution
- Product Overview
DDZY2397 single-phase charge control intelligent electric energy
meter is a fully digital intelligent electric energy meter
developed by our company. Adopt SOC high integration chip. In
addition to the active electric energy metering function, it also
has a variety of functions such as online power display,
intelligent power theft prevention, overload control, remote
centralized meter reading, etc. The data is transmitted to
thecorresponding platform through LoRaWAN/CAT1/Bluetooth wireless
network. It has the characteristics of high precision, low power
consumption and good stability,and can be widely used in the
measurement of single-phase AC power in urban, rural or factory
enterprises.
- Highlights:
1. Metering of positive and negative active electric energy. The
electric energy shall be accumulated and stored separately for
tip,peak, flat, valley and other periods and the total electric
energy. It can store and display various electric quantities in the
last 12 months.
2. It can measure, store and display the current voltage, current,
power, power factor, frequency and other operating parameters and
status of the electric energy meter. It has overload protection
function.
3. There are two sets of rates (tip, peak, flat and valley) and
time periods that can be programmed at will, and another set of
rates and time periods can be used at the set time point. At least
2 time zones can be set for each set of rate periods throughout the
year.
At least 14 time periods can be set within 24 hours; The minimum
interval between periods is 15 minutes. The time period can be set
across zero points..
4. It has the functions of event recording such as zero clearing,
programming, timing, power failure, switching on and switching off.
5. Remote power off and transmission function: send power off
command through RS485 and other communication interfaces to cut off
the user's load circuit. Or send the power transmission command to
connect the user load circuit.
- Specifications & technical parameters
| Standards | IEC62053-21, IEC62052-11, DL/T645-2007 220 |
| Current(A) | 5(60)A/0.25～0.5(60)A |
| Pulse constant(imp/kWh) | 3200 |
| Active measurement accuracy | Class B/1 |
| Reactive measurement accuracy | Class 2 |
| Frequency | 50Hz |
| Power consumption | ≤1.5W |
| Specified range | 0.9Un ~ 1.1Un |
| Expansion range | 0.8Un ~ 1.15Un |
| Limit range | 0.6Un ~ 1.2Un |
| Specified temperature range | ≤±1s/d |
| Reference temperature(23℃) | ≤±0.5s/d |
| Active power(Class 1) | ≤0.004lb |
| Reactive power(Class 2) | ≤0.005lb |
| Specified working range | -25℃~+60℃ |
| Operating limit range | -40℃~+70℃ |
| Storage and transportation | -40℃~+70℃ |
| Annual average relative humidity | < 75%RH |
| Natural distribution within 30 days of a year | 95%RH |
| Occurs occasionally in other days | 85%RH |
| LoRaWAN frequency | CN470,RU864,IN865,EU868,US/AU915,KR920,AS923.1/2/3/4, Custom Channels |
- Display items
| No. | LCD figure | Meaning |
| 1. | Character that can indicate that: Current, previous month, the previous twelve months cumulative total electricity consumption and electricity consumption at various rates. | |
| 2. | Data display and the corresponding unit symbol | |
| 3. | 1) In communication 2) Reverse power indication 3) ① ② represents periods sets 1 and 2 4) Undervoltage indication of the battery or supercapacitor voltage 5) Allow the programming status indication 6) Three times of password verification error indication | |
| 4. | T1 T2 T3 T4 | Indicates current rate status (tip peak flat valley) |
| 5. | ----ON ----OFF | ----ON is relay state on ----OFF is relay state off |
Installation
Live installation of wiring is strictly prohibited!
The electricity meter shall be installed indoors as far as possible. Special instrument box protection shall be used for outdoor installation. The installation bottom plate shall be fixed on the wall with strong fire resistance and not easy to vibration. There must be no corrosive gases in the surrounding air where the meter is installed. Avoid dust, salt spray, etc.
When using the electricity meter, the wiring must be conducted strictly according to the wiring diagram in the tail cover of the meter. It is recommended to use copper wire for the lead connected to the terminal seat. The screws of the fixed lead in the terminal seat should be tightened to avoid burning the electricity meter due to bad contact and heating.
- TRANSPORTATION AND STORAGE
Ammeters must be transported and stored under original packaging conditions. Products shall not be severely impacted during transportation and unpacking, and are transported and stored in accordance with GB / T15464-1995 General Technical Conditions for Instrument Packaging. The products should be stored in the warehouse and placed on the platform frame. The stacking height shall not exceed five layers. No corrosive gases shall be present in the stored environment.
- WARRANTY PERIOD AND AFTER-SALES SERVICE
If the user complies with the transportation, storage and
installation operation specifications, and the lead seal of the
manufacturer is still complete.If there is a quality problem, our
company is responsible for free repair or replacement within 18
months from the date of delivery the electricity meter.
During the whole life cycle of the products, our company implements
"three guarantees" for all electricity meter products, providing
necessary maintenance and services. Providing equipment wiring
diagram and necessary technical documents and drawings. According
to the requirements of users, provide necessary training for
maintenance personnel and operators. Providing training materials,
and update the software regularly and provide free upgrade.
After receiving the service request of the product user, our
company will respond within 12 hours.
LoRaWAN Wireless Transmission Iot Based Electricity Energy Meter 220V Smart Meter Solution
Inquiry Cart
0