

Add to Cart
Poultry Chicken Manure Rotary Dryer Machine Organic Fertilizer Drying Machine
Chicken Manure Drying Plant is suitable for chicken manure, cow dung, feces organic fertilizer, sludge, bean dregs, starch residue, sauce residue, sprayed corn kernels, cassava residue, beer distiller's grains, lees, straw, pasture and other 50-85% moisture content of material drying. All of our drying process technology according to the characteristics of each biomass material, the size of production, the application requirements, the cost control, the degree of automation, the site conditions etc.
Model | Power (kw) | Reducer Model | Intake Temperature (degree) | Installation Angle (degree) | Rotary Speed (r/min) | Output (t/h) |
TDHG-0808 | 5.5 | ZQ250 | above 300 | 3-5 | 6 | 1-2 |
TDHG-1010 | 7.5 | ZQ350 | above 300 | 3-5 | 6 | 2-4 |
TDHG-1212 | 7.5 | ZQ350 | above 300 | 3-5 | 6 | 3-5 |
TDHG-1515 | 11 | ZQ400 | above 300 | 3-5 | 6 | 4-6 |
TDHG-1616 | 15 | ZQ400 | above 300 | 3-5 | 6 | 6-8 |
TDHG-1818 | 22 | ZQ500 | above 300 | 3-5 | 5.8 | 7-12 |
TDHG-2020 | 37 | ZQ500 | above 300 | 3-5 | 5.5 | 8-15 |
TDHG-2222 | 37 | ZQ500 | above 300 | 3-5 | 5.5 | 8-16 |
TDHG-2424 | 45 | ZQ650 | above 300 | 3-5 | 5.2 | 14-18 |
Below is Working Principle:
Material Flow : 75-85% moisture content of the material fed into the special
dehydration machine, the water removed to about 65% through the
screw conveyor into the mixing drum dryer to downstream drying.
Flights pick up material, carry it over, and shower it through the
air stream as the drum rotates, promoting maximize efficiency of
heat transfer between the material and drying air. The rapid
evaporation of water vaporization, to achieve the effect of drying
materials in the hot air under the rapid flow of the drum. The
rotary drum dryer gives material a chance to dry before it hits the
next flights, in order to prevent buildup near the wet material
discharge. Drum cleaning device is installed inside of the drum to
prevent the material sticking issue.
Air Stream Flow :The air through the air blower increase pressure into the hot air furnace to heating, when the temperature reached to 600-850℃, the hot air will be into dryer to drying wet material and evaporation water by induce draft fan. Through three-layer heat transfer, the air temperature reduces to 55-65℃ and then discharge from dryer. The dust and moisture are purified trough the cyclone dust collector and wet dust collector.
Fertilizer dryer process flow:
Raw materials → feeding machine → heat source → dryer → discharge
machine → induced draft fan → cyclone unloader → water bath dust
removal and odor removal device → exhaust gas discharge and
distribution cabinet composition.
FAQ:
Q: Can I use this production line to produce multi granularity
particles?
Yes, our production line is multifunctional. We can customize ring
moulds of different sizes. In this way, you can easily adjust the
size of your ball.
Q: I know little about the fertilizer production line. How to
choose the most suitable machine?
Just tell us your raw materials, capacity (tons / hour) and the
size of the final particle product, and we will choose the machine
for you according to your specific situation.
Q: Our workers don't know how to operate the production line. What
should I do?
Our engineers will guide on-site workers on how to install machines
and build workshops. Then, our engineers will test the production
line on site and train your workers how to operate it.
Q: Are you a trading company or a manufacturer?
We have a large factory in Jiaozuo, China, covering an area of
10000 square meters. Welcome to visit.
Q: What's the Production Period of the Fertilizer Machine?
For single fertilizer machine, our production time is 7 days;and
for whole fertilizer production line, our production time is no
more than 30 days.
Q: What's the Quality Guarantee and Certifications?
all of our machine have passed ISO and CE certification, we can
guarantee the highest quality and our warranty time is 5 years
after shipment date.