

Add to Cart
What Are the Advantages of All in one ESS?
All in one ESS have many useful applications, these include:
Supplement Renewables
Renewable energies such as solar panels or wind turbines only
produce electricity when the sun is out or the wind is blowing.
Supplementing these with ESS allows users to take advantage of the
electricity that is generated when renewable energy technologies
are not producing electricity.
Peak Shaving
ESS allows a user to shift where their electricity comes from by
drawing power from the batteries during the higher-cost daytime
hours and then recharging during the lower-cost nighttime hours.
This practice is referred to as peak shaving.
Load Leveling
When power generation facilities ramp up and ramp down to keep up
with the changing demand for electricity, it puts stress on the
system. ESS can help flatten out the demand curve by charging when
electrical demand is low and discharging when it is high.
Uninterruptible Power Supply
ESS can provide near-instantaneous protection from power
interruptions and is often used in hospitals, data centers, and
homes.
SUNPOK All-In-One Battery With Inverter
Sunpok all-in-one battery and inverter adopts a convenient battery
modular design, integrates inverter, EMS, and UPS management
systems, and strives to create an efficient, safe, and intelligent
home energy storage system. Not only can it meet various energy
needs such as seamless switching of power supply and remote
control, but it can also configure intelligent operation solutions
according to electricity consumption habits and peak and valley
electricity prices, bringing an economical, safe, and convenient
operating experience to families.
Features:
● Flexible and convenient: standard battery modular design,
flexible configuration, convenient maintenance, and convenient
expansion; DC/DC, DC/AC, and STS different types of modules can be
freely matched to suit local conditions; DC/DC supports various
types of energy storage batteries or Photovoltaic module access can
also realize DC remote supply voltage and power control; DC/DC has
two inputs, which can be connected in parallel or independently,
realizing multi-channel MPPT and optimal management of
multi-channel batteries;
● Efficient and intelligent: The high-efficiency version adopts a
single-stage DC/AC structure to improve system efficiency; DC/DC
and DC/AC both adopt a three-level circuit design with high
conversion efficiency; advanced interleaved control technology,
small ripple current, and extended The service life of the battery;
the patented harmonic suppression technology is adopted to
intelligently adapt to diversified scenarios such as industrial and
commercial, micro-grid, and distribution station terminals; the
number and functions of self-identifying modules of the micro-grid
intelligent management system integrate multiple operating
strategies and communication interfaces, and are unified Scheduling
and intelligent management; when the mains power fails or fails,
the STS module automatically cuts off the faulty circuit, and the
optical storage system provides off-grid power supply to ensure the
reliability of power supply.
● Recommended configuration: a combination of solar and storage,
peak shaving and valley filling: provincial distribution of power
frequency transformers; microgrid multi-energy complementary power
supply: configuration of power frequency transformers;
uninterrupted power supply of important loads: configuration of
power frequency transformers.
All-in-one Energy Storage System Parameters
Model | SP-AIO-3Kw-24V-YD | SP-AIO-5KW-48V-YD |
Voltage | 25.6V | 51.2V |
Capacity | 200Ah | 200Ah |
Energy | 5.12KwH | 10.24KwH |
Charging voltage | 29.2V | 58.4V |
Discharge voltage | 20.8V | 41.6V |
Charging current | 100A | 100A |
Discharging current | 150A | 150A |
Communication | Internal communication | |
Power | 3Kw | 5Kw |
Battery input | 24Vdc | 48Vdc |
MPPT | 60-180Vdc,80A | 60-180Vdc,80A |
AC input/output | 220/230Vac,50/60Hz | 220/230Vac,50/60Hz |
AC Charge Current | 15A | 15A |
AC output waveform | Pure sine wave | Pure sine wave |
Size | 814*550*320mm | 1016*550*320mm |
Charging temperature | 0℃~45℃ | |
Discharge temperature | -20℃~55℃ | |
Storage temperature | -10°C~45°C (charge/discharge every 2 months) | |
Weight | 110Kg | 185Kg |
About Sunpok Energy
Guangzhou sunpok energy co., ltd. is a high-tech green energy
enterprise integrating battery research and development, design,
and production. It was registered in Guangzhou, China in September
2016.
After years of development, sunpok energy has become a leader in
China's energy storage industry, vertically integrated upstream and
downstream supply chain resources, continuously optimized the
company's product matrix, improved product performance, and won
praise from customers at home and abroad.
The products of sunpok energy have been sold all over the world,
bringing green energy to more than 12,000 families and units. At
present, the products of sunpok energy mainly include:
1. Energy Storage Lithium Battery
2. 48V Lithium Ion Battery
3. Lithium Portable Power Station
4. All In One ESS
5. Complete Off Grid Solar System
6. Hybrid Solar System Kit
7. Wind Solar Hybrid Power System
8. Off Grid Inverter
9. Deep Cycle Lithium Battery
10. 12V Gel Battery
11. Mono PV Panels
12. Residential Wind Turbine
Mutual benefit and win-win results have always been the tenet of
Sunpok Energy. In the future, sunpok energy will work with partners
to scale new heights with a more inclusive attitude.
FAQ
Question 1: What is the lead time?
Answer 1: We can deliver within 3-15 days.
Question 2:What is the warranty period, and how many years?
Answer 2: The warranty period for all-in-one ess is 5 years.
Question 3: How is your technical support?
Answer 3: We provide lifetime online support through Whatsapp/
Skype/ Wechat/ Email. Any problem after delivery, we will offer you
a video call anytime, our engineer will also go to oversea help our
customers if necessary.
Question 4:How to become your agent?
Answer 4: Contact us through web email or phone, and we can talk
about details to confirm.
Question 5: Is the sample available and free?
Answer 5: The sample will be charged a cost, but the cost will be
refunded after the bulk order.
Question 6: Do you support OEM/ODM?
Answer 6: Of course, we can do customized services for our
partners.
If you have other questions, please add the contact information of
our sales manager to understand, thank you!