800VA 6.3V 12V 24V 36V Output Transformer Electrical Box Industrial Control 12V 10 AMP
Place of Origin:China
Packaging Details:Export wooden case
Supply Ability:10 Set/Sets per Day
Price:$550.00/sets >=1 sets
Phase:Three
Coil Structure:TOROIDAL
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Product Description
Specification
Manufacturing Technique
Transformer material configuration instructions:
1.Iron core
Adopt imported new high quality silicon steel sheet,
2.Wire
PEW, UEW, EIW, SEIW, FEAI enamelled wire and glass silk-covered wire, temperature resistance grade F (155℃) 0℃)
3.Insulation material
Using high temperature resistant insulating paper as insulation material, with high temperature insulation, flame retardant and
moisture resistance multiple properties.
4.Insulating material terminal block
Adopt high quality copper bar.
5.Iron feet
Mainly using numerical control bending cold binding plate, plating colorful (golden), blue zinc (silver), white zinc (ivory),
surface anode treatment (black) and other environmental protection plating options.
Adopt imported new high quality silicon steel sheet,
2.Wire
PEW, UEW, EIW, SEIW, FEAI enamelled wire and glass silk-covered wire, temperature resistance grade F (155℃) 0℃)
3.Insulation material
Using high temperature resistant insulating paper as insulation material, with high temperature insulation, flame retardant and
moisture resistance multiple properties.
4.Insulating material terminal block
Adopt high quality copper bar.
5.Iron feet
Mainly using numerical control bending cold binding plate, plating colorful (golden), blue zinc (silver), white zinc (ivory),
surface anode treatment (black) and other environmental protection plating options.
Title goes here.
1 Applicable altitude: ≤5000m
2 Ambient temperature: -15 ° C to +45 ° C
3 Relative humidity: ≤90%
4 The installation site should be free from gas, steam, chemical deposition, dirt, conductive dust and other explosive,
inflammable and corrosive substances that seriously affect the insulation strength of the transformer.
2 Ambient temperature: -15 ° C to +45 ° C
3 Relative humidity: ≤90%
4 The installation site should be free from gas, steam, chemical deposition, dirt, conductive dust and other explosive,
inflammable and corrosive substances that seriously affect the insulation strength of the transformer.
Transformer action:
1.electrical safety isolation, reduce zero ground voltage.
2.with filtering anti-interference function.
3. It can effectively inhibit the interference of the system caused by high harmonics and lightning electromagnetic pulse from the power line.
4.can effectively inhibit the high order harmonics issued by the electronic equipment of the system into the power distribution network to other equipment (devices and systems) interference
5.It can fundamentally prevent the system from working disorder, data loss or error caused by ground potential disturbance.
6.It can effectively prevent the hardware equipment in the system from being destroyed by counterattack when the lightning protection device of the building meets the lightning because the steel potential of the reference ground rises sharply.
7.isolation transformer is widely used in the construction, its main reason is that the secondary isolation transformer is not connected with the earth, it is no potential difference between any two lines and the earth. So it's safer. Isolation transformer is commonly used in electronic instruments with electronic tubes and high working voltage, such as tube amplifiers, oscilloscopes,
and can also be used for power maintenance.
8.Overcome center point drift and improve power supply imbalance.
9.Anti-surge impact and filtering function.
2.with filtering anti-interference function.
3. It can effectively inhibit the interference of the system caused by high harmonics and lightning electromagnetic pulse from the power line.
4.can effectively inhibit the high order harmonics issued by the electronic equipment of the system into the power distribution network to other equipment (devices and systems) interference
5.It can fundamentally prevent the system from working disorder, data loss or error caused by ground potential disturbance.
6.It can effectively prevent the hardware equipment in the system from being destroyed by counterattack when the lightning protection device of the building meets the lightning because the steel potential of the reference ground rises sharply.
7.isolation transformer is widely used in the construction, its main reason is that the secondary isolation transformer is not connected with the earth, it is no potential difference between any two lines and the earth. So it's safer. Isolation transformer is commonly used in electronic instruments with electronic tubes and high working voltage, such as tube amplifiers, oscilloscopes,
and can also be used for power maintenance.
8.Overcome center point drift and improve power supply imbalance.
9.Anti-surge impact and filtering function.
What you need to know about ordering:
Users should make the following points clear when purchasing
products:
1. Basic model, specification, capacity and quantity of transformer;
2. Primary and secondary voltage of transformer;
3, when providing secondary voltage, it is best to provide the capacity distribution of each output voltage;
4. The shape and installation size are for reference only. If the required size needs to be changed, it must be stated when
ordering.
Note: If you have special requirements, the company can design and manufacture for you.
1. Basic model, specification, capacity and quantity of transformer;
2. Primary and secondary voltage of transformer;
3, when providing secondary voltage, it is best to provide the capacity distribution of each output voltage;
4. The shape and installation size are for reference only. If the required size needs to be changed, it must be stated when
ordering.
Note: If you have special requirements, the company can design and manufacture for you.
Company Profile
Zhaoyang Trading Co., Ltd. is a trade company integrating industry
and trade, with a registered capital of 1 million yuan. It is a
specialized trading company. The company's main direction is
machinery and related products, in the blow molding and injection
industry has decades of experience. In the company's main planning
goal is to develop overseas markets, our products while ensuring
the quality of low prices. At the technical level, our technical
staff are in the industry for more than decades, have a reliable
guarantee, such as: CE certificate. At the after-sales level, we
have specialized after-sales personnel who will help customers
solve different problems in a demonstration manner. So that
customers can master the operation of the machine faster, but also
so that we have won the recognition of customers. At present, our
Foreign trade Department has a number of salesmen to build their
own team, committed to developing overseas markets. We will
customize the exclusive scheme suitable for different customers
according to their needs. Company to "focus on customers,
intentions to serve" as the core value, all customer needs as the
center, hope through professional level and unremitting efforts,
create a good corporate image, for the enterprise product promotion
and development to provide excellent service;
FAQ
1. who are we?
We are based in Zhejiang, China, start from 2022,sell to Africa(50.00%),South America(20.00%),Southeast Asia(10.00%),South Asia(10.00%),Central America(5.00%). There are total about 1-4 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Environmental protection equipment,Blow molding machine,Injection molding machine,auxiliary machine,TRANSFORMER
4. why should you buy from us not from other suppliers?
null
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,L/C;
Language Spoken:null
We are based in Zhejiang, China, start from 2022,sell to Africa(50.00%),South America(20.00%),Southeast Asia(10.00%),South Asia(10.00%),Central America(5.00%). There are total about 1-4 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Environmental protection equipment,Blow molding machine,Injection molding machine,auxiliary machine,TRANSFORMER
4. why should you buy from us not from other suppliers?
null
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW；
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,L/C;
Language Spoken:null
800VA 6.3V 12V 24V 36V Output Transformer Electrical Box Industrial Control 12V 10 AMP
Inquiry Cart
0