Product Details
Prime Quality Tiso brand 316 316L Stainless Steel Coil Roll 304
Stainless Steel sheet Coil
304 vs 316 Stainless Steel: Heat Resistance
Heat resistance is an important factor to consider when comparing
the different grades of stainless steel. The melting range of 304
is around 50 to 100 degrees Fahrenheit higher than 316. Although
the melting range of 304 is higher than 316, they both have good
resistance to oxidization in intermittent service up to 870°C
(1500℉) and in continuous service at 925°C (1697℉).
· 304 SS: Handles high heat well, but continuous use at 425-860 °C
(797-1580 °F) may cause corrosion.
· 316 SS: Performs best in temperatures above 843 ℃ (1550 ℉) and
below 454 ℃ (850°F)
Price Difference of 304 Stainless Steel vs 316
What makes 316 more expensive than 304 stainless steel? The increase of nickel content and the addition of molybdenum in
316 makes it more expensive than 304. On average, the price of 316
stainless steel 40% higher than the price of 304 SS.
| Product Name | ASTM /AISI / SUS 201 321 316 304 Stainless Steel Coil/Roll |
| Grade | ASTM S30400 AISI304 SUS304 EN1.4301 ASTM316 ASTM316L SUS321 |
| Also we supply : 201,202,
301,302,303,304L,316,316L,321,308,308L,309,309L,309S,309H,310,310S
,410,420, 430,2205,2507,409,904L etc |
| Specification | Thickness:cold rolled 0.1~3mm hot rolled 3mm~6mm per customized |
| Width:914mm;1000mm;1219mm;1250mm;1500mm;1524mm or per customized |
| Finish/Surface: NO.1,2B,BA,8K,No.4,HL,SB,Embossed,Checkered, etc... |
| Standard | ASTM A240/240M ; ASME SA-240/SA-240M; JIS G4305; DIN/BS/NF
EN10028-7 ; ISO;GB/T 3280-2015 |
| Technology | Cold Rolled; Hot Rolled |
| Edge | Mill Edge; Cut Edge |
| Trade Term | EXW , FOB , CIF , CFR, DDU, etc . |
| Application | Dinner set, Kitchen ware, Owner frame of security door, Auto
vent-pipe, Vacuum cup Clean bucket water sink and so on |
| Advantages | Factory Price; Top quality; First-rate service; We have many
long-term customers to prove our reputation. |
| Chemical Composition |
| ASTM | JIS | DIN/BS/NF EN | GB/T | ISO | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Ni | Cr |
S20100
201 | SUS201 | X12CrMnNiN17-7-5
1.4372 | 12Cr17Mn6Ni5N
(1Cr17Mn6Ni5N) | X12CrMnNiN17-7-5 | 0.15 | 1 | 5.50-7.50 | 0.5 | 0.03 | 3.50-5.50 | 16.00-18.00 |
S20200
202 | SUS202 | X12CrMnNi18-9-5
1.4373 | 12Cr18Mn9Ni5N
(1Cr18Mn8Ni5N) | ----------- | 0.15 | 1 | 7.50-10.00 | 0.5 | 0.03 | 4.00-6.00 | 17.00-19.00 |
S30100
301 | SUS301 | X5CrNi17-7
1.4319 | 12Cr17Ni7
(1Cr17Ni7) | X5CrNi17-7 | 0.15 | 1 | 2 | 0.045 | 0.03 | 6.00-8.00 | 16.00-18.00 |
S30400
304 | SUS304 | X5CrNi18-10
1.4301 | 06Cr19Ni10
(0Cr18Ni9) | X5CrNi18-9 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.00-11.00 | 18.00-20.00 |
S30403
304L | SUS304L | X2CrNi19-11
1.4306 | 022Cr19Ni10
(00Cr19Ni10) | X2CrNi19-11 | 0.03 | 1 | 2 | 0.045 | 0.03 | 8.00-12.00 | 18.00-20.00 |
S30900
309 | SUH309 | X12CrNi23-13
1.4833 | 16Cr23Ni13
(2Cr23Ni13) | X12CrNi23-13 | 0.2 | 1 | 2 | 0.04 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S30908
309S | SUS309S | X12CrNi23-13
1.4833 | 06Cr23Ni13
(0Cr23Ni13) | X12CrNi23-13 | 0.08 | 1 | 2 | 0.045 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S31000
310 | SUH310 | X15CrNiSi25-21
1.4841 | 20Cr25Ni20
(2Cr25Ni20) | X8CrNi25-21 | 0.25 | 1 | 2 | 0.04 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31008
310S | SUS310S | X8CrNi25-21
1.4845 | 06Cr25Ni20
(0Cr25Ni20) | X8CrNi25-21 | 0.08 | 1 | 2 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31600
316 | SUS316 | X5CrNiMo17-12-2
1.4401 | 06Cr17Ni12Mo2
(0Cr17Ni12Mo2) | X5CrNiMo17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31603
316L | SUS316L | X2CrNiMo17-12-2
1.4404 | 022Cr17Ni12Mo2
(00Cr17Ni14Mo2) | X2CrNiMo17-12-2 | 0.03 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31635
316Ti | SUS316Ti | X6CrNiMoTi17-12-2
1.4571 | 06Cr17Ni12Mo2Ti
(0Cr18Ni12Mo3Ti) | X6CrNiMoTi17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S32100
321 | SUS321 | X6CrNiTi18-10
1.4541 | 06Cr18Ni11Ti
(0Cr18Ni10Ti) | X6CrNiTi18-10 | 0.08 | 1 | 2 | 0.045 | 0.03 | 9.00-12.00 | 17.00-19.00 |
1.Good Quality and Complete Specifications
The cutting is flat and smooth,advanced technology reliable quality
complete specifications.2.Accurate Tolerance
Advanced machine production,exquisite workmanship,accurate
thickness strict testing,each product is produced in strict
accordance with the requirements.
3.Support Customization
There are many product styles, complete specifications,support
customization.
4.Professional Packaging
Single box packaging.standard export sea-worthy packing and
standard carton or according to customers demand for steel
customized.
Certificates
Company Profile
Hongtu Metal was founded in 2006 with a registered capital of 27 million US
dollars. It is a comprehensive, modern and high-quality enterprise
integrating steel production, processing and sales. Since its
establishment, the company has developed rapidly. It has built
long-term and stable cooperative relations with Shandong Iron and
Steel, Rizhao Iron and Steel, Shanxi Tisco, Shanghai Baoshan Iron
and Steel, Xiwang Special Steel and other major domestic steel
plants. It is the first-class agent of major steel plants and has
been selected as excellent agent and excellent cooperator for many
times. In order to provide better services to customers, the
company has set up a professional foreign trade team to solve
one-stop steel export business for customers.
