welcome you visit our factory also.
Polishing Plating 3/4" Brass Stop Valve manual For Plumbing System
Brand Name:qishang
Minimum Order Quantity:2000 pieces
Place of Origin:Zhejiang, China
Packaging Details:box,carton and wood pallets for conceal cock zinc
Supply Ability:5000000 Piece/Pieces per Week
Price:$0.65/pieces 2000-999999 pieces
Contact Now
Add to Cart
Verified Supplier
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
201 polishing plating stop valve
Stop Valves
Stop valves, aka globe valves, are only meant for water. They’re
commonly found at plumbing fixtures, such as the water supply
line to your toilet or as part of your outside faucet. A stop valve works by moving a stopper up and down. The photos below show a
stop valve in the open position, halfway open position, and fully closed position.
Open or closed: To know if the valve is open or closed, take a look at the stem. If you carefully examine the stem in the photos
above, you’ll see that when the valve is fully closed, the stem isn’t visible at all. Most stop valves are much smaller than the
one pictured above, but I decided to use a larger one for my example because it gives the best view. The photo below shows an
exploded view of the guts of a stop valve.
line to your toilet or as part of your outside faucet. A stop valve works by moving a stopper up and down. The photos below show a
stop valve in the open position, halfway open position, and fully closed position.
Open or closed: To know if the valve is open or closed, take a look at the stem. If you carefully examine the stem in the photos
above, you’ll see that when the valve is fully closed, the stem isn’t visible at all. Most stop valves are much smaller than the
one pictured above, but I decided to use a larger one for my example because it gives the best view. The photo below shows an
exploded view of the guts of a stop valve.
Stop valves take several hand movements to operate and they tend to
get difficult to operate over time. They also leak when they
haven’t been touched in a while. For this reason, no home inspector
should ever touch one of these valves. Yes, I’ve learned the hard
way. If you have a leaking stop valve, you can often stop the leak
by using a wrench to tighten the nut right below the handle. Lefty
loosey, righty tighty. But this won’t always stop the leak, because
sometimes new packing is needed.
Material: | Brass , zinc |
Craft: | Nickel, chrome, laser, plating |
Medium: | Water, Oil, Fuel gas |
Pressure: | PN 2.0 Mpa |
Temperature: | -20℃—120℃ |
Yuhuan QiShang valve factory
More details pls do feel free to contact with me !
Polishing Plating 3/4" Brass Stop Valve manual For Plumbing System
Inquiry Cart
0