New & Original Dmos Driver For Bipolar Stepper Motor L6228D

Certification:new & original
Model Number:L6228D
Minimum Order Quantity:10pcs
Delivery Time:1 day
Payment Terms:T/T, Western Union, Paypal
Place of Origin:original factory
Contact Now

Add to Cart

Active Member
Location: Shenzhen China
Address: Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

DMOS DRIVER FOR BIPOLAR STEPPER MOTOR


■ OPERATING SUPPLY VOLTAGE FROM 8 TO 52V

■ 2.8A OUTPUT PEAK CURRENT (1.4A RMS)

■ RDS(ON) 0.73Ω TYP. VALUE @ Tj = 25°C

■ OPERATING FREQUENCY UP TO 100KHz

■ NON DISSIPATIVE OVERCURRENT PROTECTION

■ DUAL INDEPENDENT CONSTANT tOFF PWM CURRENT CONTROLLERS

■ FAST/SLOW DECAY MODE SELECTION

■ FAST DECAY QUASI-SYNCHRONOUS RECTIFICATION

■ DECODING LOGIC FOR STEPPER MOTOR FULL AND HALF STEP DRIVE

■ CROSS CONDUCTION PROTECTION

■ THERMAL SHUTDOWN

■ UNDER VOLTAGE LOCKOUT

■ INTEGRATED FAST FREE WHEELING DIODES


TYPICAL APPLICATIONS

■ BIPOLAR STEPPER MOTOR


DESCRIPTION

The L6228 is a DMOS Fully Integrated Stepper Motor Driver with non-dissipative Overcurrent Protection, realized in MultiPower-BCD technology, which combines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two-phase bipolar stepper motor including: a dual DMOS Full Bridge, the constant off time PWM Current Controller that performs the chopping regulation and the Phase Sequence Generator, that generates the stepping sequence. Available in PowerDIP24 (20+2+2), PowerSO36 and SO24 (20+2+2) packages, the L6228 features a non-dissipative overcurrent protection on the high side Power MOSFETs and thermal shutdown.


BLOCK DIAGRAM


ABSOLUTE MAXIMUM RATINGS

SymbolParameterTest conditionsValueUnit
VSSupply VoltageVSA = VSB = VS60V
VOD

Differential Voltage between

VSA, OUT1A, OUT2A, SENSEA and VSB, OUT1B, OUT2B, SENSEB

VSA = VSB = VS = 60V;

VSENSEA = VSENSEB = GND

60V
VBOOTBootstrap Peak VoltageVSA = VSB = VSVS + 10V
VIN,VENInput and Enable Voltage Range-0.3 to +7V

VREFA,

VREFB

Voltage Range at pins VREFA and VREFB-0.3 to +7V

VRCA,

VRCB

Voltage Range at pins RCA and RCB-0.3 to +7V

VSENSEA,

VSENSEB

Voltage Range at pins SENSEA and SENSEB-1 to +4V
IS(peak)Pulsed Supply Current (for each VS pin), internally limited by the overcurrent protection

VSA = VSB = VS;

tPULSE < 1ms

3.55A
ISRMS Supply Current (for each VS pin)VSA = VSB = VS1.4A

Tstg,

TOP

Storage and Operating Temperature Range-40 to 150°C

China New & Original Dmos Driver For Bipolar Stepper Motor L6228D supplier

New & Original Dmos Driver For Bipolar Stepper Motor L6228D

Inquiry Cart 0