

Add to Cart
SM6T6V8CA Electronics Integrated Circuit Chip Surface Mount Transient Voltage Suppressor
SM6T SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 220 Volts
600 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AA. Molded plastic over glass passivated junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode) except Bidirectional
Standard Packaging: 12mm tape (EIA STD RS-481)
Weight: 0.003 ounces, 0.093 grams)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use CA Suffix for types SM6T6V8CA thru types SM6T220CA Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING | SYMBOL | VALUE | UNITS |
Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1) | PPPM | Minimum 600 | Watts |
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) | IPPM | SEE TABLE 1 | Amps |
Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note2, 3) | IFSM | 100 | Amps |
Operatings and Storage Temperature Range | TJ, TSTG | -55 +150 | °C |
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
RATING AND CHARACTERISTIC CURVES