

Add to Cart
High Insulation Performance 472M 400VAC Y1 Safety Capacitor Use
High-Voltage Ceramics
There are some variable elements in the circuit, such as inductors,
capacitors, etc. These variable elements generally can only bring
about or reduce the relative change (or reduction) of the
sinusoidal quantity of its corresponding frequency. For example,
when the switch is turned on, the alternating current will change
repeatedly between Y1 and Y2, and the electromagnetic field
generated at this time (a magnetic field similar to the light
emitted by the light source) will naturally generate force between
the wires. "Relative" plays a decisive role.
The difference between Y1 capacitor and Y2 capacitor
1. The withstand voltage and pitch are different
The rated voltage of the Y1 capacitor is 400VAC and the withstand
voltage can reach 4000VAC
The rated voltage of the Y2 capacitor is 300VAC and the withstand
voltage can reach 2600VAC
The conventional pitch of Y1 capacitor is 10mm
The conventional pitch of Y2 capacitor is 7.5mm
2. Different types of insulation
The Y1 capacitor belongs to double insulation or reinforced
insulation
The Y2 capacitor belongs to basic insulation or supplementary
insulation
Features and applications:
It is coated with flame retardant epoxy resin, conforming to
UL94V-0 standards
Ceramic disc capacitors are specifically designed for AC
applications and meet the safety requirements of various safety
standard agencies
The type DCF capacitors are ideal for using in electromagnetic
interference suppression and connection to the supply mains, line
bypass, antenna coupling, across the line and double-protection
application
Advantages
1. We have all models of material, save you time looking fort And
recommend materials for you if you need.
2. With the same quality products, we can give you best
priceInquiries to after-sale, we will provide good service, such
asupdate product status, technical support etc (24 hour online)
3. We have many stocks, and the delivery time usually is short.
ITEM | SPECIFICATION | TEST METHOD AND CONDITION | ||||||||||||||||
Temp Cycling | Appearance | No marked defect | The capacitor shall be introduced into the test chamber, and shall be exposed to the temperature conditions as shown in table at 5 cycles. pretreatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2hours before initial measurement. Post-treatment: Capacitor shall be stored for 24±2 hours at room conditions.
| |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1000MΩ min | |||||||||||||||||
Humidity (Under Steady State) | Appearance | No marked defect | Set the capacitor for 500±12 hours at 40±2℃ in 95±3% RH. pre-treatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2 hours before initial measurement. Post-treatment: The capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min | |||||||||||||||||
Dielectric Strength | Per Item 8 | |||||||||||||||||
Life Test | Appearance | No marked defect | Apply a voltage of 500V.AC,except that once each hour the voltage is increased to 1000V.AC for 0.1sec.that shall be maintained for 1000±48 hours at 125±2℃. Pre-treatment: Capacitor shall be stored at 125±2℃ for 1 hour, then placed at room condition for 24±2H before initial measurements. Post-treatment: Capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
I.R. | 1500MΩ min |
Product Voltage, Material, Size reference Table
Product and size code | Rated AC Voltage | Temperature Characteristic | Rated Capacitance | Tolerance of Capacitance | Size (mm) | |||
D.max | T.max | P±0.8 | d±0.05 | |||||
Q065B□□100K□ | 400Vac | (B) | 10pF | K | 6.5 | 4.5 | 10 | 0.55 |
Q065B□□150K□ | 15pF | 6.5 | 4.5 | 10 | 0.55 | |||
Q070B□□220K□ | 22pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q070B□□330K□ | 33pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q070B□□470K□ | 47pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q070B□□560K□ | 56pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q070B□□620K□ | 62pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q070B□□820K□ | 82pF | 7.0 | 4.5 | 10 | 0.55 | |||
Q065B□□101K□ | 100pF | 6.5 | 4.5 | 10 | 0.55 | |||
Q065B□□221K□ | 220pF | 6.5 | 4.5 | 10 | 0.55 | |||
Q075B□□331K□ | 330pF | 7.5 | 4.5 | 10 | 0.6 | |||
Q085B□□471K□ | 470pF | 8.5 | 4.5 | 10 | 0.6 | |||
Q085B□□561K□ | 560pF | 8.5 | 4.5 | 10 | 0.6 | |||
Q095B□□681K□ | 680pF | 9.5 | 4.5 | 10 | 0.6 | |||
Q110B□□821K□ | 820pF | 11.0 | 4.5 | 10 | 0.6 | |||
Q115B□□102K□ | 1000pF | 11.5 | 4.5 | 10 | 0.6 | |||
Q065E□□471K□ | (E) | 470pF | 6.5 | 4.5 | 10 | 0.55 | ||
Q075E□□561K□ | 560pF | 7.5 | 4.5 | 10 | 0.6 | |||
Q075E□□681K□ | 680pF | 7.5 | 4.5 | 10 | 0.6 | |||
Q075E□□821K□ | 820pF | 7.5 | 4.5 | 10 | 0.6 | |||
Q085E□□102K□ | 1000pF | 8.5 | 4.5 | 10 | 0.65 | |||
Q095E□□152M□ | 1500pF | M | 9.5 | 4.5 | 10 | 0.65 | ||
Q105E□□222M□ | 2200pF | 10.5 | 4.5 | 10 | 0.65 | |||
Q115E□□332M□ | 3300pF | 11.5 | 4.5 | 10 | 0.65 | |||
Q065F□□102M□ | (F) | 1000pF | 6.5 | 4.5 | 10 | 0.55 | ||
Q075F□□152M□ | 1500pF | 7.5 | 4.5 | 10 | 0.6 | |||
Q085F□□222M□ | 2200pF | 8.5 | 4.5 | 10 | 0.6 | |||
Q100F□□332M□ | 3300pF | 10.0 | 4.5 | 10 | 0.65 | |||
4700pF | 11.5 | 4.5 | 10 | 0.65 |
Specification and Test Method
ITEM | SPECIFICATION | TEST METHOD AND CONDITION | |||||||||||||
Storage Temp. Range | -40℃~+125℃ | ||||||||||||||
Operating Temp. Range | -25℃~+125℃ | ||||||||||||||
| Appearance has |
| |||||||||||||
|
|
| |||||||||||||
|
| Temp. 20±2℃ | |||||||||||||
Dissipation Factor | B,E:2.5% max |
| |||||||||||||
| 10,000MΩ |
| |||||||||||||
|
|
|
| ||||||||||||
|
|
| |||||||||||||
| B:-10~+10% |
|
Production Process
1. Package in tube/reel/cut tape/bulk, bubble wrap, box, carton;
2. Original manufacturer package, the out package will be in a well
condition with suitable size to save the shipping cost;
3. Sample with same-day or the next-day delivery, bulk order within
3-7 days, but depens on the exact quantity;
4. Customer shipping account are available;
5. If the declared value for customs clearance are required, please
tell us before shipping;
6. Registered packet, DHL, FedEx, UPS, ARAMEX, EMS,Air shipping,
Sea shipping or others.