

Add to Cart
SXH81 Gas Discharge Tube RoHS & HF Compliant For Consumer
Electronics
SXH8 0 - 230X SMDT.pdf
Gas discharge tube is a gap-type lightning protection component,
which has been widely used in lightning protection of communication
systems. The discharge tube is often used in the first or first two
stages of a multi-level protection circuit to discharge lightning
instantaneous overcurrent and limit overvoltage. Since the
inter-electrode insulation resistance of the discharge tube is
large and the parasitic capacitance is small, it is not suitable
for high frequency Lightning protection for signal lines has
definite advantages. The main shortcomings of the protection
characteristics of the discharge tube are that the discharge time
delay is large, the action sensitivity is not ideal, and it is
difficult to effectively suppress the lightning wave with a steep
rise of the wave head, and there is a freewheeling problem in the
lightning protection of the power system.
GDT introduction: Gas discharge tubes (GDT) use noble gasses
enclosed in ceramic tubes to provide an alternate circuit path for
voltage spikes.The ceramic envelope and with nickel connectors
allow for high loads and Surging offers products that function at
20KA,40KA,50KA,60KA,100KA&150KA. The breakdown voltages of the
devices have a wide range (up to 20% tolerance).Major applications
are high frequency telecommunication lines,stations, security
systems,HID and high quality Surge Protection Devices (SPD).
Warehouse Storage Conditions of Products
· Storage Conditions:
1. Storage Temperature: -10°C~+40°C
2. Relative Humidity:≤75%RH
3. Keep away from corrosive atmosphere and sunlight. · Period of
Storage: 1 year
Recommended Applications
1. Cable Modem 2. xDSL
3. Set-Top Box
4. TV sets
5. Power supplier
6. Consumer electronics
Materials | Dull Tin-plated |
Product Marking | Without |
Storage and Operational Temperature | -10°C~+40°C |
Weight | ~30mg |
Climatic category (IEC 60068-1) | 40/ 90/ 21 |
Features | Non-Radioactive RoHS compliant Ultra low capacitance (<0.5pF) UL recognized Excellent response to fast rising transients 0.5KA surge capability tested with 8/20μs pulse as defifined by IEC 61000-4-5 Square Outline |
Applications | Communication equipment CATV equipment Test equipment Data lines Power supplies Telecom SLIC protection Broadband equipment ADSL equipment, including ADSL2+ XDSL equipment Satellite and CATV equipment General telecom equipment ESD protection |
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 1 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ ?
A: MOQ depend on the type of product, 1pc for sample checking is
available