Hospital Burns Surgery Instruments NPWT Surgical Wound Drainage Device

Negative Pressure Wound Therapy Burns Surgery Instruments Surgical Instruments Wound Drainage Device

Electric Negative Pressure Wound Therapy System Pump is a negative pressure drainage device for treating various breached or compromised surface wounds only used with Negative Pressure Wound Therapy System Dressing Sets. By generating regular intermittent negative pressure to create conditions for surgical repair.

Electric Negative Pressure Wound Therapy System Pump is portable and consists of main body(including an electric Negative pressure pump, PCBA, Rechargeable Battery), accessories( including Negative pressure Bottle, Power Adapter) and software.
There are two works style: pre-set work style, and physician setting work style. The pre-set work style is for conventional medical operation while physician setting work style is for medical staff to do clinical study.
The negative pressure value of conventional medical operation of the device is 80-120mmhg (10.66-15.99kPa). Under physician setting work style, the medical staff can freely adjust vacuum pressure from 4kPa to 24kPa (30-180mmHg) at 1mmHg (0.13kPa) step.
The digital display shows that the long-life negative pressure pump is adopted, which can run continuously for a long time, with noise less than 55dB, no pollution, air flow rate of 6-12L/min, and high work efficiency.

Electric Negative Pressure Wound Therapy System Pump is used with wound dressings to therapy wound. When the pump is turned on, the user will have 6 fix modes to choice to be suitable for different wound therapy. Also the user can use 7th physician-made mode, which negative pressure ranges from 30-180mmHg(4-24Kpa). All modes are intermittent therapy with 5min suction and 2min rest.
The device is programmed to work, and has notice functions as low voltage, tube/wound sealing air leak alarm, over-higher pump work
temperature.

1. Please read the manufacturer's instructions in detail and follow the instructions before using.
2. Keep away from children, pets, pests, dust and lint because they may damage this device and/or affect its performance.
3. Medical staff should be trained professionally prior to use this device
4. Before starting the machine, be sure to no loose or leaking in every part or part joints.
5. The main body should be kept dry. Do not wash in water. Should not be used in wet or splashed water environment.
6. Do not operate this device if it has a damaged power cord, power supply or plug. If these components are worn or damaged, contact your local distributor..
7. Do not drop or insert object into any opening or tubing of this product.
   Do not try to modify this product without authority permission.
8. Do not connect this product to other devices that are not produced by our company.
   Do not spill liquid on any part of this product. In case of this happen, unplug the adapter if plugged in, then clean the liquid from this product. Ensure there is no liquid and nothing abnormal when starting the test machine. Otherwise, contact your local distributor.
9. Do not use and/or store this product in or near these places where it can fall or be pulled into a tub, shower, bath, sink or toilet.
10. Do not reach for this product that has fallen into water. Unplug the unit immediately if plugged in. Disconnect the unit from dressing and contact your local distributor.
11. Cell phones or similar products could affect this product. Move this product away from these devices if interference is suspected.

The user must read the manual carefully before using the product.

Replacement of negative pressure bottle

Remove : remove the negative pressure bottle from the left side of the machine, palm up, hook the handle of the blue cover of the negative pressure bottle with the index finger and middle finger of the left hand, hold the thumb against the shell, and pull it horizontally to the left slightly to take out the negative pressure bottle, as shown in the figure below

Installation: prepare the new negative pressure bottle, connect one end of the elbow of suction connection pipe to the suction port of the negative pressure bottle, and insert the negative pressure bottle buckle with the left palm to the negative pressure bottle cavity of the machine

Remove the battery fixing screw from the back shell of the machine with a cross screwdriver; Use thumb, index and middle finger cards
Live the battery buckle pull ring, thumb and index finger to close together; At the same time, the wrist is pulled outward in the direction perpendicular to the battery, that is, the battery can be removed, and a new battery can be replaced in the opposite way and be put into the machine

This device stores 6 commonly used negative pressure closed drainage treatment programs and a user-definable negative pressure treatment program in CUP of mainboard. When the power is turned on, a command is input from the therapeutic device screen and a treatment program accordingly. Then a driving circuit on the main board generates a certain frequency of current to act on the negative pressure pump to generate a negative pressure. During operation, the pressure sensor detects and monitors the negative pressure change, at same time these negative pressure information is transmitted back to the CPU. Through this dynamic control, the working frequency of the negative pressure pump is continuously kept relatively stable preset-value, thereby achieving the effect of negative pressure treatment.

Electric Negative Pressure Wound Therapy System Pump is intended to deliver negative pressure via the Negative-pressure Wound Therapy System Dressing Sets to the breached or compromised surface wound, in order for the removal of fluids, including wound exudates, irrigation fluids, body fluids and infectious materials, and is used only in hospital environment, not for civilian, household, ambulance and field hospital.

The device is applicable to the following treatment areas:
Acute wound.
Chronic and refractory wounds.
Wound surface requiring drainage due to excessive fluid leakage after surgery.

The device is forbidden use in such wound as:
Undebridable wound with necrotic eschar
Wounds with tumor tissue.
Fistula communicating with internal cavity viscera.
Wounds with large blood vessels or organs exposed.

The company promises to provide warranty service within one year from the date of purchasing the equipment produced by the company. If the product itself has quality problems, the company has the right to choose to repair or replace the product without adding any cost to the user.
The company will not be jointly and severally liable for product damage caused by abuse, accident, improper operation or violation of instructions for use. The customer must return the warranty registration card to the company within 30 days after the product is damaged, otherwise it will be deemed invalid. Information such as invoices and product serial numbers must be filled in. The warranty card is limited to the original purchaser and cannot be transferred.

1.What is advantage on quality?
The company is furnished with developed equipment and technology from Germany, Belgium, and Taiwan (area).

2. What is MOQ?
30,00 pcs, It depends on requirements of products.

3. How to place a order?
Place order with salesperson
Make payment for deposit;
Sample making for confirmation before mass production;
After sample confirmed, mass production start;
Goods are finished,inform buyer to make payment for balance;
Delivery.
Production time : 30-40 days.

4. What is your term of payment?
T/T is a regular payment (30% in advance, 70% before shipping).
Paypal and Western Union are just for a sample

Shandong Chuangkang Biotechnology Co., Ltd. is an innovative company which is established in 2012. Our company is committed to research and producing PVA Dressing. We own 10, 000 square meters 100, 000-level purification GMP workshop. 1000 square meters sterile laboratory and use high-quality raw materials and advanced independent design and improvement of fully automated production equipment.

In 2004, based on the introduction of American VSD technology, we researched, developed and produced a trauma negative pressure treatment system with self intellectualperty rights, which has been registered and certified by SFDA of the StateFood and drug administration. It has also passed CE and SGS certification. This technology is the first in China and is the first to be popularized and applied in China. Now the third generation of negative pressure drainage treatment technology is fully on the market It has been used in clinic and created a newera of trauma negatve pressure treatment technology.

At present, we have been working in the First Hospital of Peking University, Qilu Hospital of Shandong University, Second Hospital of Shandong University, General Hospital of Jinan Military Region, Shandong Provincial Hospital, First Affiliated Hospital of Guangzhou Sun Yat-sen University, First Affiliated Hospital of Guangxi Medical University...

The company adheres to the business philosophy of " integrity, high quality innovation andpragmatism, making trends and being a down-to-earth person ", moving forward step by step and doing everything well in a down-to-earth manne. The products and technologies developed by the company conform to the intemational use concept, which is more convenient and efficient R & AMP: Production and sales of vanous professional medical products for the purposeof medical service and convenience Always put quality first, take meeting the requirements of customers as the work goal, and control the production process to improve our product quality and service.

Main products:

Trauma negative pressure drainage dressing

Intelligent trauma negative pressure comprehensive treatment

Negative pressure drainage protection material

Multifunctional ultrasonic debridement machine

Diabetic foot insoles