

Add to Cart
High Quality Negative Pressure Wound Therapy Instrument With Drainage Dressing Set
Product Introduction
Product use
Disposable negative pressure drainage and wound protection materials are used for drainage of acute wounds, chronic refractory wounds and wounds with more exudate after surgery.
Product description
Product principle:
VSD negative pressure drainage is an advanced technology for the
current treatment of acute wounds and chronic refractory wounds.
The third generation of intelligent trauma negative pressure
comprehensive treatment instrument (VSD negative pressure wound
treatment instrument) through regular and intermittent negative
pressure on the wound after debridement, can quickly increase the
blood flow of the wound, promote the new blood vessels into the
wound, stimulate the growth of granulation tissue, and at the same
time play the role of adequate drainage, reduce edema, reduce
infection, inhibit the growth of bacteria, can directly accelerate
the healing of the wound, or create good conditions for surgical
repair of the wound.
Product advantages:
The third generation of intelligent trauma negative pressure comprehensive treatment instrument (VSD negative pressure wound treatment instrument) is simple to use, widely used, negative pressure trauma treatment system.
1. World technology
1) Double pressure display, double pressure control technology
Traditional negative pressure drainage, can only show the pressure
of the negative pressure source, but also can only control the
pressure of the negative pressure source, but can not display and
control the pressure change of the wound treatment site we care
about, the third generation of intelligent trauma negative pressure
comprehensive treatment instrument can accurately display or
control the pressure of the wound, clinicians can choose the size
and control of negative pressure according to the nature of wound
secretions, wound necrotic tissue.
2) Wound dressing/pipe blockage, air leakage monitoring technology
Wound dressing/duct obstruction is a common cause of negative
pressure closure drainage treatment, and traditional negative
pressure drainage cannot determine the obstruction of dressing and
duct, but often affects the treatment effect. The third-generation
intelligent trauma negative pressure comprehensive treatment
instrument can accurately monitor the blockage and air leakage of
wound dressing/pipeline, and has digital display and multiple alarm
functions.
3) Gas shock and liquid flushing technology in closed wound
The third-generation intelligent trauma negative pressure
comprehensive treatment instrument has semi-automatic and fully
automatic wound dressing, gas shock and drainage, and liquid
flushing and resistance. Effectively relieve and reduce wound
dressing/tubing obstruction, ensure the effectiveness and
reliability of trauma negative pressure treatment, and reduce the
number of dressing changes.
It is equipped with semi-automatic and fully automatic negative
pressure suction, gas or liquid perfusion treatment of wounds. For
serious infections or special cases of wounds, there is no need to
change dressings, no need to open the wound, clinicians can choose
a variety of gases or prepare ** anti-inflammatory, sterilized,
nutritional support and other therapeutic solutions, perfusion
treatment of the wound, creating a new way to treat the wound.
2. Technology
1) Intelligent pressure control technology: microcomputer control,
powerful software functions, can accurately execute the program,
control the pressure and time within the program range.
2) Negative pressure pump ultra-low silence, ultra-long life. Even
at night, treatment does not affect the patient's rest; Work for
long periods of time for months without worrying about damage to
the negative pressure pump.
3) Wound sealing technology: a variety of specifications of
supporting consumables, medical sponge with perfect functions,
biological film, can close the whole body of large-scale burns
patients to receive trauma negative pressure sealing drainage
treatment. It can also seal any small diabetic foot ulcer and
receive effective trauma-negative pressure treatment.
Model | ZN50 |
Adapter input | 100-240VAC 50/60Hz 2.0-1.0A |
Adapter output | 20VDC 8A |
Maximum suction flow | 8L/min |
Type of safety protection | BF type |
The battery specification | DC14.8V 5000mAh |
Waterproof level | IPX0 |
Device dimensions | 300mm x140mm x 280mm |
The host weight | 3.5Kg |
Pressure output range | -30 to 180mmHg(4-24Kpa) |
Working time | 5min |
The intermittent time | 2min |
Control the pressure fluctuation range | Rated value ±10mmHg(1.33kPa) |
Pressure accuracy error | Less than ±10% |
The user must read the manual carefully before using the product.
Replacement of negative pressure bottle
Remove : remove the negative pressure bottle from the left side of the
machine, palm up, hook the handle of the blue cover of the negative
pressure bottle with the index finger and middle finger of the left
hand, hold the thumb against the shell, and pull it horizontally to
the left slightly to take out the negative pressure bottle, as
shown in the figure below
Installation: prepare the new negative pressure bottle, connect one
end of the elbow of suction connection pipe to the suction port of
the negative pressure bottle, and insert the negative pressure
bottle buckle with the left palm to the negative pressure bottle
cavity of the machine
Remove the battery fixing screw from the back shell of the machine
with a cross screwdriver; Use thumb, index and middle finger cards
Live the battery buckle pull ring, thumb and index finger to close
together; At the same time, the wrist is pulled outward in the
direction perpendicular to the battery, that is, the battery can be
removed, and a new battery can be replaced in the opposite way and
be put into the machine
Electric Negative Pressure Wound Therapy System Pump is intended to
deliver negative pressure via the Negative-pressure Wound Therapy
System Dressing Sets to the breached or compromised surface wound,
in order for the removal of fluids, including wound exudates,
irrigation fluids, body fluids and infectious materials, and is
used only in hospital environment, not for civilian, household,
ambulance and field hospital.
The device is applicable to the following treatment areas:
Acute wound.
Chronic and refractory wounds.
Wound surface requiring drainage due to excessive fluid leakage
after surgery.
The device is forbidden use in such wound as:
Undebridable wound with necrotic eschar
Wounds with tumor tissue.
Fistula communicating with internal cavity viscera.
Wounds with large blood vessels or organs exposed.
The company promises to provide warranty service within one year
from the date of purchasing the equipment produced by the company.
If the product itself has quality problems, the company has the
right to choose to repair or replace the product without adding any
cost to the user.
The company will not be jointly and severally liable for product
damage caused by abuse, accident, improper operation or violation
of instructions for use. The customer must return the warranty
registration card to the company within 30 days after the product
is damaged, otherwise it will be deemed invalid. Information such
as invoices and product serial numbers must be filled in. The
warranty card is limited to the original purchaser and cannot be
transferred.
1. What is the advantage of quality?
The company is furnished with developed equipment and technology
from Germany, Belgium, and Taiwan (area).
2. What is MOQ?
30,00 pcs, It depends on the requirements of the products.
3. How to place an order?
Place an order with the salesperson
Make payment for deposit;
Sample making for confirmation before mass production;
After the sample is confirmed, mass production starts;
Goods are finished, inform the buyer to make payment for the
balance;
Delivery.
Production time: 30-40 days.
4. What is your term of payment?
T/T is a regular payment (30% in advance, 70% before shipping).
Paypal and Western Union are just for a sample