

Add to Cart
5.0 Inch IC 7262 Color TFT LCD Modules/800 X 480 Dots/TFT-H050A1SVIST6N40
Product parameters
Display Content - 800x480
Display Size - 5.0 inch
Perspective - Full Perspective
Backlight brightness - 600cd/m2
Connection method PIN number - 40PIN0.5 connected
Interface method - RGB
Special Instructions - Ultra Wide Temperature Operation
Working temperature - (-30~80℃)
Supply Voltage - 3.3V
General Feature
Item | Standard Value | Unit |
Display Size | 5.0 inch | -- |
Number of Pixels | 800(H)x3(RGB)*480(V) | -- |
Active Area | 108.00(H) *64.80(V) | mm |
Outline Dimension | 120.70(H) ×75.80× 3.0(V) | mm |
Viewing Direction | FULL O’Clock | - |
Interface | TTL 24 bit interface | - |
LCM Driver IC | ST7262 | - |
LCM Driver Condition | VCI=3.3V | V |
Backlight | White LED | - |
Touch Panel | Without Touch Panel | - |
CTP Driver IC | - - - | |
CTP Driver Condition | - - - | |
Operation Temperature | -30~75 | ℃ |
Storage Temperature | -30~85 | ℃ |
Pin Description
Pin NO. | Symbol | Description |
1 | LED_K | LED Cathode |
2 | LED_A | LED Anode(+16V/40mA) |
3 | GND | Ground |
4 | VCI | Analog Power(3.0 ~ 3.6 V,3.3V) |
5-12 | DR0-DR7 | Red data bus. |
13-20 | DG0-DG7 | Green data bus. |
21-28 | DB0-DB7 | Blue data bus. |
29 | GND | Ground |
30 | PCLK | Pixel clock input pin |
31 | DISP | Display on/off (DISP=L:Standby mode;DISP=H:Normal display mode) |
32 | HSD | Horizontal sync signal, default is negative polarity. |
33 | VSD | Vertical sync signal, default is negative polarity. |
34 | DEN | Data input enable. Display access is enabled when DE is “H”. |
35 | NC | No Connector |
36 | GND | Ground |
37 | NC/RTP_XR | Resistive TP function pin.If not used, let this pin open. |
38 | NC/RTP_YD | Resistive TP function pin.If not used, let this pin open. |
39 | NC/RTP_XL | Resistive TP function pin.If not used, let this pin open. |
40 | NC/RTP_YU | Resistive TP function pin.If not used, let this pin open. |