

Add to Cart
3.5" TFT Touch Screen/3.5" TFT LCD Screen 320x240/TFT-H035A1QVIST6C54
Product parameters
Product Type - TFT Landscape
Display Content - 320x240
Display Dimensions (mm) - 3.5"
Perspective - Full Perspective
Backlight brightness - 600cd/m2
Connection method PIN number - FPC-54PIN
Interface - RGB+SPI
Special Instructions - TTL8/24-BIT
Working temperature - (-30~85℃)
Supply Voltage - 3.3v
General Feature:
Item | Standard Value | Unit |
Display Size | 3.5” | -- |
Number of Pixels | 320(H)x3(RGB)x240(V) | -- |
Active Area | 70.08(H) x52.56(V) | mm |
LCM Outline Dimension | 76.84(H) ×63.84× 4.65(V) | mm |
Viewing Direction | Full O’Clock | - |
LCM Interface | 8/24-bit RGB with 3-wire SPI | - |
LCM Driver IC | ST7272A | - |
LCM Driver Voltage | VCI=2.8V | V |
Backlight | White LED | - |
Touch Panel | With Touch Panel | - |
CTP Driver IC | FT5216 | - |
CTP Driver Voltage | VDD=3.3 | V |
CTP I/O Digital Voltage | VDD=3.3 | V |
Operation Temperature | -30~85 | ℃ |
Storage Temperature | -40~85 | ℃ |
Pin Description
Pin NO. | Symbol | Description |
1,2 | LED_K | LED Cathode |
3,4 | LED_A | LED Anode |
5 | RTP_YU | Resistive TP function pin.If not used,let this pin open. |
6 | RTP_XR | Resistive TP function pin.If not used,let this pin open. |
7 | NC | No Connect |
8 | RESX | LCM Reset Pin. |
9 | SPI_CS | ♦ Chip select input pin (“Low” enable). ♦ If not used, please fix this pin at VCI. |
10 | SPI_SCL | ♦ In SPI mode, this pin is used as SCL. ♦ If not used, please let this pin open. |
11 | SPI_SDA | ♦ SPI interface input/output pin. ♦ If not used, please let this pin open. |
12-19 | DB0-DB7 | Blue data bus.If not used, please fix this pin at GND. |
20-27 | DG0-DG7 | Green data bus.DG[7:0] are used in 8-bit RGB interface. |
28-35 | DR0-DR7 | Red data bus.If not used, please fix this pin at GND. |
36 | HSD | Horizontal sync signal, default is negative polarity. |
37 | VSD | Vertical synchronizing input signal for RGB interface. |
38 | PCLK | Pixel clock input pin. |
39,40 | NC | No Connect |
41,42 | VCI | Analog Power |
43 | RTP_YD | Resistive TP function pin.If not used,let this pin open. |
44 | RTP_XL | Resistive TP function pin.If not used,let this pin open. |
45-51 | NC | No Connect |
52 | DEN | Data input enable. Display access is enabled when DE is “H”. |
53,54 | GND | Ground |
CTP Pin Description
Pin NO. | Symbol | Description |
1 | VSS | Ground |
2 | VDD | Power Supply Voltage |
3 | SCL | Clock input |
4 | VSS | Ground |
5 | SDA | Data input and output |
6 | VSS | Ground |
7 | /RST | External Reset, active low |
8 | WAKE | Wakeup request from the host |
9 | INT | Interrupt request to the host |
10 | VSS | Ground |
Product Description
Product Description The TFT-H035A1QVIST6C54 is a 3.5-inch wide
temperature IPS TFT-LCD monitor with a projected capacitive touch
screen with a resolution of 320x240 pixels. The module has built-in
ST7272A driver IC and supports RGB+SPI interface.
TFT-H035A1QVIST6C54 adopts IPS panel, which has the advantage of
wider viewing angle, left: 80/right: 80/up: 80/down: 80 degrees
(typical), contrast ratio 600:1 (typical), brightness 600 nits
(typical) value), glare panel, 4:3 aspect ratio. Support I2C
interface and multi-touch function. The H035A1 model features a
projected capacitive touch panel (CTP). The supply voltage (VCC) of
the TFT-H035A1QVIST6C54 is 3.0V to 3.6V, with a typical value of
3.3V. It can work at temperatures from -30°C to +85°C and storage
temperatures from -30°C to +85°C.