

Add to Cart
DESCRIPTION
H101A9WSIFTKR40 is a landscape mode 10.1 inch IPS TFT LCD module
with Resistive Touch Panel; made of resolution 1024x600 pixels.
H101A9WSIFTKR40 model is built in with EK79001HN and EK73215BCGA
driver ICs, it supports LVDS interface, contrast ratio 800:1
(typical value), brightness 1000 nits (typical value), aspect ratio
16:9, anti-glare surface glass, normally black, transmissive LCD
type. This 10.1" IPS TFT has a wider viewing angle than TN TFT,
it's view angle is Left:85 / Right:85 / Up:85 / Down:85 degree
(typical value).
The power supply voltage (VDD) of H101A9WSIFTKR40 is from 3.0V to 3.6V, typical value 3.3V. It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.
General Feature
Item | Standard Value | Unit |
Display Size | 10.1 | Inch |
Number of Pixels | 1024(H)x*3(RGB)x 600(V) | dots |
Active Area | 222.72(H)x 125.28(V) | mm |
Outline Dimension | 235.00(H) * 143.00(V) * 6.90(D)) <TFT+RTP> | mm |
Viewing Direction | FULL O'clock | - |
TFT Interface | LVDS | - |
TFT Driver IC | EK79001+EK73215 | - |
TFT Driver Condition | VCI=3.3V(Typ) | V |
Backlight | White LED/42 PCS/6 LEDs serial 7 ways parallel | - |
Touch Panel | Without TP With RTP With CTP | - |
CTP Driver IC | - | |
CTP Driver Condition | VDD=3.3V(Typ) | V |
Operation Temperature | -20 ~ 70 | ℃ |
Storage Temperature | -30 ~ 80 | ℃ |
TFT Pin Description
Pin NO. | Symbol | Description |
1 | VCOM | TFT Common Electrode Voltage |
2~3 | VCI | Digital Power |
4 | NC | No Connect |
5 | RESX | Global reset pin. Active low to enter reset state. Usually pulled high. For stability, an RC delay circuit needs to be connected externally. (RESX delay VCI greater than 1ms) |
6 | STBYB | Standby mode, normally pull high. STBYB = "VCI", normal operation STBYB = “GND”, Standby mode |
7 | GND | Ground |
8 | D0N | LVDS negative differential data |
9 | D0P | LVDS positive differential data |
10 | GND | Ground |
11 | D1N | LVDS negative differential data |
12 | D1P | LVDS positive differential data |
13 | GND | Ground |
14 | D2N | LVDS negative differential data |
15 | D2P | LVDS positive differential data |
16 | GND | Ground |
17 | DCKN | LVDS negative differential clock |
18 | DCKP | LVDS positive differential clock |
19 | GND | Ground |
20 | D3N | LVDS negative differential data |
21 | D3P | LVDS positive differential data |
22 | GND | Ground |
23~24 | NC | No Connect |
25 | GND | Ground |
26~27 | NC | No Connect |
28 | HSD | Data channel selection STBYB = "VCI", 6 bit STBYB = “GND”, 8 bit |
29 | AVDD | Analog Power |
30 | GND | Ground |
31~32 | LEDK | LED Cathode,Not connected here |
33 | L/R | Horizontal scan direction control pin L/R= "VCI", From left to right(Default) L/R= “GND”, From right to left |
34 | U/D | Vertical scan direction control pin U/D= "VCI", From down to up. U/D= “GND”, From up to down.(Default) |
35 | VGL | TFT Gate OFF Voltage |
36~37 | NC | No Connect |
38 | VGH | TFT Gate ON Voltage |
39~40 | LEDA | LED Anode,Not connected here |
RTP Pin Description
Pin NO. | Symbol | Description |
1 | XL | X-axis measuring foot |
2 | YD | Y-axis measuring foot |
3 | XR | X-axis measuring foot |
4 | YU | Y-axis measuring foot |