

Add to Cart
2.8" Sunlight Readable 240x320 TFT LCD Display/240x320 Dots/TFT-H028A1QVIST6N40
Product parameters
Display Size - 2.8"
Perspective - Full Perspective
Backlight brightness - 600cd/m2
Connection method PIN number - 40PIN
Interface - MCU+SPI
Special instructions - MCU 8/16 parallel port, SPI 3L/4L serial
port
Working temperature - (-20~70℃)
Supply Voltage - 2.8V
Driver chip model - ST7789V
General Feature:
Item | Standard Value | Unit |
Display Size | 2.8” | - |
Number of Pixels | 240(H)x3(RGB)x320(V) | - |
Active Area | 43.20(H) x 57.60(V) | mm |
Outline Dimension | 50.00(H) x 69.20(V) x 2.30(D) | mm |
Viewing Direction | Full O’Clock | - |
TFT Interface | MCU 8/16 Bit / SPI 3L/SPI 4L | - |
TFT Driver IC | ST7789V2 | - |
TFT Driver Condition | VCI=2.8V,IOVCC=1.8V(Typ) | V |
Backlight | White LED | - |
Touch Panel | Whitout Touch Panel | - |
CTP Driver IC | - - - | - |
CTP Driver Condition | VDD=3.3V(Typ) | V |
Operation Temperature | -30 ~ 70 | ℃ |
Storage Temperature | -40 ~ 85 | ℃ |
Product Description
Product Description TFT-H028A1QVIST6N40 is a 2.8-inch full-color
TFT LCD module with a resolution of 240x320 pixels and an aspect
ratio of 2:3. The TFT module adopts ST7789V driver IC and supports
MCU interface. The TFT module with IPS panel has the advantage of
wide viewing angle (left 80 degrees/right 80 degrees/up 80
degrees/down 80 degrees), the typical contrast ratio is 800:1, and
the module brightness is up to 600 nits (typical value). The
working temperature range of the module is -20℃~+70℃, and the
storage temperature range is -30℃~+80℃.
Pin Description
Pin NO. | Symbol | Description |
1 | GND | Ground |
2 | NC/RTP_YD | Resistive TP function pin.If not used, let this pin open. |
3 | NC/RTP_XR | Resistive TP function pin.If not used, let this pin open. |
4 | NC/RTP_YU | Resistive TP function pin.If not used, let this pin open. |
5 | NC/RTP_XL | Resistive TP function pin.If not used, let this pin open. |
6 | NC/SDO | SPI interface output pin.If not used, let this pin open. |
7 | VCI | Digital Power |
8 | IOVCC | I/O Power |
9 | NC/SDI | SPI interface input pin.If not used, let this pin open. |
10 | CS | Chip selection pin |
11 | RS | Display data/command selection pin |
12 | WR | ♦Write enable in MCU parallel interface. ♦Display data/command selection pin in 4-line serial |
13 | RD | Read enable in 8080 MCU parallel interface. |
14~29 | DB[0~15] | Data bus |
30 | RESX | TFT Reset Pin. |
31 | IM0 | IM0=GND: 16-bit i80;IM0=IOVCC: 8-bit i80 |
32 | NC | Open Pin |
33 | GND | Ground |
34~37 | LEDK | LED Cathode |
38 | LEDA | LED Anode |
39 | GND | Ground |
40 | NC | Open Pin |