

Add to Cart
KENTON Anaerobic Incubator Anaerobic Workstation For Lab
Anaerobic incubator(custom-made is available):
anaerobic incubator is composed of incubator, vacuum sampling
chamber, air circuit and circuit control system. The whole machine
has the advantages of novel shape, compact structure, good
anaerobic environment, good sealing performance, high temperature
control accuracy, good stability, convenient use, gas saving,
economy, safe and reliable operation, etc. The product is a special
device for bacterial culture and operation in anaerobic
environment. It can cultivate the most difficult anaerobic
organisms and avoid the danger of death caused by exposure to
oxygen when anaerobic organisms used to operate in the atmosphere.
Structural characteristics:
the equipment adopts the intelligent PID temperature controller
which can accurately and intuitively reflect the actual temperature
in the chamber. With safe and reliable temperature limiting
protection device.
UV sterization lamp is installed in the equipment, the filtered gas
flowing into the chamber can effectively avoid bacterial
contamination.
Gas circuit device, which can adjust the flow , and can inject all
kinds of required gases.
Operating chamber are made of stainless steel. The front window are
made of thick transparent and impact-resistant special glasses. The
gloves are reliable, comfortable, flexible and easy to operate.
requirement for door-to-door debugging (user-provided):
2pcs gas cylinders (40L carbon cylinder), one of bottle of mixed
gas, mixture gas ratio: CO2 5%; H2 10%; N (high purity nitrogen)
85%. Another bottle of gas is 99.99% high purity nitrogen, then
matched with cylinder pressure relief valves 2pcs(output pressure
is about 0.1 MPA).
Chemical reagent required: HA deoxidizer 500g and desiccant 500g
(Note: We can buy HA deoxidizer and desiccant for you).
Product parameters:
Model | YQX-Ⅱ |
Sampling chamber access | 16×24.5cm |
Time of anaerobic formation in asmpling chamber | <5 minutes |
Anaerobic time in operation room | <1hour/O2 content≤1% |
Maintenance time of anaerobic environment | Operating chamber Stops Supplying Trace Mixed Gases, >12hours |
Temperature control range of incubation chamber | RT3~60℃ |
Precision | ±0.1℃ |
Temp.fluctuation | ±0.3℃ |
Temp.uniformity | ±1℃ |
Voltage/Power | 220V/50Hz,1400W |
N.W/G.W | 240/320kg |
Sampling chamber access | 210×210mm |
Incubation chamber dimension | 230×230×230mm |
Operation chamber dimension | 550×820×660mm |
Exterior dimension | 1410×740×1210mm |
Packing dimension | 1590×880×1340mm |
The performance parameters tested under no-load conditions are as follows:ambient temperature 20℃, ambient humindity 50% RH. | |
Can not be used for long-term cold storage. |