Carbide Grooving Insert Slotting Mgmn300 Mgmn500 Mgmn600 Mgmn 2mm 5mm Cutting Tools

Quick Detail:

• Surface coating
• Wear resistant and durable
• Sharp blade
• Smooth cutting
• High finish

Description:

• The carbide grooving insert is made of fine particles by careful grinding. With high temperature resistant components, it has higher hardness, better toughness, stronger deformation resistance, excellent wear resistance and impact resistance toughness, and higher processing efficiency; Sharp edge, solid and durable, full edge anti-seismic design can restrain chatter during processing, and improve the quality of processing surface; Large front angle, the cutting edge is close to the cutting surface, which is more conducive to reducing cutting resistance and favorable for surface finish.

Specifications:​

Lead Time:

Notice:

• The cnc carbide grooving insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the cnc carbide ​grooving insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the cnc carbide ​grooving insert are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the cnccarbide ​grooving insert are not used, hang the blade vertically on the dry shelf.

Applications:

Our cnc carbide ​grooving insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ