

Add to Cart
34w Electrostatic Powder Spray Machine Chrome Spray Machine For
Industrail
Product Introduction
The spray equipment uses an automatic current feedback circuit and
adds a pulse control circuit. The gas control part adopts two-stage
gas source filtration, voltage regulation and air pressure
adjustment, all designed as preset adjustments. The powder output
is more uniform, the atomization is better, and the dead angle is
much better.
Use the digital panel forwarding key. It can change the pulse and
normal function, and voltage current display function. With a very
high powdering rate and the best coating quality.
Product Specification
MODEL | THD001 | THD002 | THD003 | THD004 |
Dimension | 64*46*98 | 64*46*98 | 64*46*98 | 64*46*98 |
Weight | 32 | 31 | 31 | 32 |
Input power | 50 | 34 | 34 | 34 |
Input voltage | 110/220VAC | 110/220VAC | 110/220VAC | 110/220VAC |
Frequency | 50-60Hz | 50-60Hz | 50-60Hz | 50-60Hz |
Max Output voltage | 0-100KV | 0-100KV | 0-100KV | 0-100KV |
Hopper volume | 55L | 55L | 55L | 55L |
Polarity | Negative | Negative | Negative | Negative |
Prepare fluidized barrel
Set the drain - add powder - adjust the fluidization size through
the controller
Open the spray booth
Open the spray booth according to the relevant instructions
Boot
Turn on the controller – turn on the power switch to ON – the
controller indicator lights up and enters the operating state
characteristics
1. The workplace can be painted at room temperature