Air Cooled Screw Industrial Water Chiller Machine 120HP
Brand Name:ANGES
Model Number:120HP
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T, L/C
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Room 1610,Xinlong Building,Baishilong Community,Minzhi Street,Longhua District,Shenzhen,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Industrial Screw Chiller Air Cooled Water Chiller Industrial Chiller System Process Chiller Screw Chiller Manufacturers
What is water chiller?
Chiller is a equipment for cooling water and providing stable
temperature, flow and pressure. The working principle of a water
chiller is to first input certain water into a reservoir, through
the chiller cooling system the water would be cooled down, then the
cold water will be pump to a industrial process or any other
subjects need cooling. and the warm or hot water occurred would go
back into the reservoir for a new cooling cycle heat exchange,
hence to realize the cooling of a device.
What is the difference between screw and scroll chiller?
The two main types of air cooled chillers are scroll compressor and
screw compressor chillers. Generally speaking, scroll compressors
are used for the small capacity chiller, the capacity can reach
approximately 30hp or less for single unit, and screw compressors
are used for larger capacity,available for small to medium cooling
loads. These chillers are typically available in 40 to 600 tons.
Screw compressors work by using two interlocking rotating helical
rotors to compress the refrigerant, have simple structure, fewer
moving parts and wear parts, ensuring less noise and more reliable
operation. Stepless variable-speed control can be achieved within a
range of 10%-100%, improving energy efficiency.
Industrial Screw Chillers Specification
Model | AGS-120ASH | |
| nominal cooling capacity | kcal/h | 329208 |
| kw | 382.8 | |
| input power | kw | 125 |
| Max. Running current | A | 283.7 |
| power supply | 3PH~380V/50HZ | |
| refrigerant | type | R22 |
| refrigerating circuit | 1 | |
| type of control | thermostatic expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| Power | 106.5 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| condenser | type | air cooled type finned copper tube |
| cooling air flow (m3/h) | 122000 | |
| power(kw) | 18 | |
| evaporator | type | shell and tube |
| quantity | 1 | |
| chilled fluid flow (m3/h) | 65.8 | |
| inlet and outlet pipe diameter (inch) | 5 | |
| safety protection | compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing | |
| net weight | kg | 3250 |
| Dimension | mm | 4400*2240*2420 |
Note: 1. Nominal cooling capacity is according to:
Inlet chilled fluid temperature:17℃
Outlet chilled fluid temperature: 12℃
Inlet cooling air temperature: 30℃
Outlet cooling air temperature:35℃
2. Working Range:
The temperature range of chilled fluid is from 5℃ to 30℃;
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
The machine can be used while the ambient temperature is below 40℃.
We reserve the right to modify the above dimensions or parameters without further notice.
Benefits of industrial screw compressors chiller
- Continuous airflow. The rotary screw compressors have a very low internal temperature, avoiding heating issues. No need for cooling down periods or breaks.
- High volume capacity. Since screw compressors can keep running 24/7 without heating problems, they generate higher volumes of compressed air than other types of compressors.
- Energy-efficient.Screw compressors can achieve comparable part-load efficiencies, whether you run your chiller more often at part or full load, it will save energy.
- Long service life. Screw compressors work by using two interlocking rotating helical rotors to compress the refrigerant, have simple structure, fewer moving parts and wear parts, more reliable operation.
- Low noise. The screw compressor rotors compressing the air are not in direct contact with each other, which cuts down on noise and provides a calm work environment.The piston compressors are loud.
Why do I need an industrial chiller?
- Provide constant temperature and constant water flow chilled water to the production line, to increased production speed and ensure efficiency production.
- Accurate temperature control capability, the freezing temperature can be accurate to ±1℃, to ensure the highest quality final products.
- The cooling fluid is recirculated to reduce waste and cost.
- Water chiller systems prevent damage to heat-sensitive industrial components preventing undesirable repair downtime that might slow or even halt production altogether.
Water chiller service from manufacturer
We are industrial chiller manufacturer, chiller service can be online support, video technical support, site service in some areas are available.
Site service will be done by our water chiller distributor, Indonesia, Philippines, Thailand, Singapore, Malaysia, Australia, United States, Israel, Egypt and so on.
- All the chillers are provided with 12 months free maintenance service.
- Provide technical explanation, chiller debugging support, technical training and chiller maintenance guidance.
- If necessary, after-sales engineers can be on-site service confirmed by both parties through communication .In some areas, local dealers can provide fast and convenient service.
- Provide the air chiller and water chiller required parts quickly to ensure the normal use of customers.If necessary, part of the wearing parts can be provided for backup after confirmation by both parties.
- Chiller maintenance service outside the warranty period, life-long tracking maintenance, cost price to provide equipment parts.
Air Cooled Screw Industrial Water Chiller Machine 120HP
Inquiry Cart
0