100hp Water-cooled Screw Type Chiller With Hanbell Compressor Use For Cooling Mixing Tank
Brand Name:ANGES
Model Number:100HP
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T, L/C
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Room 1610,Xinlong Building,Baishilong Community,Minzhi Street,Longhua District,Shenzhen,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
100hp Water-cooled Screw Type Chiller with Hanbell Compressor Use
For Cooling Mixing Tank
The chiller for cooling the mixing tank is a refrigerating machine
that transfers the coldness of the chilled water to the material in
the reactor through the jacket or coil of the reactor, and cools
the material in the form of indirect cooling. The circulation of
the chilled water is mainly achieved by a low-temperature
circulation pump, and the chilled water is produced by a chiller.
It is not affected by the external environment and the chilled
water temperature can be set by yourself.
Water-cooled Low Temperature Screw Type Chiller Specification
Model Item | AGS-100WSH | |
| nominal cooling capacity | kcal/h | 321554 |
| kw | 373.9 | |
| input power | kw | 73.9 |
| max running current | A | 168.4 |
| power supply | 3PH-380V-50HZ | |
| refrigerant | type | R22 |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| evaporator | type | shell and tube |
| chilled fluid flow (m3/h) | 64.3 | |
| pipe diameter (inch) | 4 | |
| condenser | type | shell and tube |
| cooling water flow (m3/h) | 77 | |
| pipe diameter (inch) | 4 | |
| safety protection | compressor over temperature protection, over load protection, high and low pressure protection, flow switch protection, reversed and lacking phase protection, anti-freezing protection,fusible protection. | |
| dimension | mm | 3500*1050*1600 |
| net weight | kg | 1720 |
| running weight | kg | 1960 |
Principle of refrigeration system
- The principle of the refrigeration system of the chiller for cooling the mixing tank, the ice machine for cooling the mixing tank, and the freezing water machine for cooling the mixing tank is that the low-temperature and low-pressure liquid refrigerant exchanges heat with the surrounding water in the evaporator. The evaporator absorbs the heat of the water and evaporates into a low-temperature and low-pressure gas.
- The temperature of the refrigerant remains unchanged during the evaporation process. The low-temperature and low-pressure gaseous refrigerant enters the compressor, is compressed by the compressor, and is compressed into a high-temperature and high-pressure gas, and then enters the condenser, where it exchanges heat with the indoor medium.
- Part of the heat of the high-temperature and high-pressure gas is absorbed by the medium, the temperature of the medium rises, and the refrigerant releases heat to the condenser to become a high-temperature and high-pressure liquid.
- The temperature of the condenser process remains unchanged, and then enters the expansion valve for throttling. Throttling is a process of rapid cooling, and the refrigerant becomes a low-temperature and low-pressure liquid.
- After this process, the refrigerant enters the evaporator for heat exchange and evaporation, thereby realizing the entire process of the refrigeration system. This cycle is continuous, and water can be continuously cooled.
How to select the model of the chiller ?
In the production process, the injection molding machine needs to cool the mold to achieve rapid condensation of plastic, improve product quality, and improve production efficiency.
Here, the chiller is indispensable. Chiller used in injection molding machine, through extrusion, blow bottle, thermoplastic, hydraulic system four steps to achieve rapid condensation of plastic.
This shows the importance of the chiller to the injection molding machine. In the selection of chiller should pay attention to:
In mold cooling, the choice of ice water energy depends on its specific heat capacity with the molding material, the temperature at the time of sol, the weight, and the temperature at the time of product release.
In terms of temperature difference, the smaller the temperature difference, the more ice water flow is required to carry away the same heat, and the smaller the ice water flow is require
100hp Water-cooled Screw Type Chiller With Hanbell Compressor Use For Cooling Mixing Tank
Inquiry Cart
0