Nozzle Jet Atomization Large Capacity Centrifugal Spray Dryer In Pharmaceutical
Brand Name:SNYNXN
Certification:CE ISO GMP
Model Number:GLP-150
Minimum Order Quantity:1
Delivery Time:within 60 days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Active Member
Address:
No.57 Zhangjia,Shennan District,Shengang Street, Jiangyin City,Jiangsu,China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Description: Industrial Large Capacity Spray Dryer In
Pharmaceutical Preparation
Nozzle Jet Atomization Industrial Large capacity Spray Dryer In
Pharmaceutical preparations Machine PRICE
1,Feed system
It is composed of screw pump and feed pipe and valve. The screw
pump adopts frequency conversion speed regulation to effectively
control the feed quantity. The main part of the pipeline valve is
SUS304 stainless steel, and it is clean and sanitary
2 ,Medium circulation system
It is composed of blower, draft fan, muffler, air regulating
butterfly valve and wind pipe Draft fan and blower are high quality
manufacturers supply, cooperation for many years, quality is
stable; the blower for SUS304 stainless steel, to ensure clean air;
fan with a silencer, effectively reduce the noise. The system
volume, wind pressure, wind speed, is the key, based on years of
experience, is now mature.
3,Air heating and cleaning system
It consists of early, medium and high temperature HEPA filters,
fans, steam radiators, electric heaters, etc.
The heat source is a steam radiator and an electric heater. The
material is made of stainless steel pipes and stainless steel fins.
The utility model not only ensures the cleanness of the air inlet
system, but also has high thermal efficiency and can guarantee the
output heat
4,Drying tower system
It is composed of a dry main tower, a hot air distributor, an
atomizer, an observation manhole, a tower lighting device, a
pneumatic hammer, a lower bin, a cylinder body and a cone jacket,
and a cooling system. This system is the core system
a). combined with the test experience, we in the design process of
the main tower of the main tower: adjust the straight cylinder
height to diameter ratio, adjusted by 0.9:1 routine to about 1.1:1;
prolong the retention time of the material, the drying effect is
ensured. The adjustment of the taper cone tower, consists of a
conventional 60 degree angle adjustment to 54 degrees, fully
considering the smooth material in the cone when feeding.
b). the atomizer atomizer using frequency converter to adjust the
speed to achieve the best effect. The base will reduce the
atomizing atomizer, the atomizing disk atomizer and increase the
distance, the droplets in the air can not be returned under the
spinning top, in order to ensure the normal operation of the
system.
c). design a set of Taneiduo lighting devices and 1 doors,
manholes.
d). hot air vortex shell tower by accelerating structure, the hot
air in the tower when pressed material effectively, orderly and
swirl decreased. Hot air distributor with the characteristics and
requirements of the technology, do both sides distributor the wind
guiding mechanism, and can adjust the angle, in order to control
the hot air into the tower when the tangential angle.
e). the main tower design of jacket cooling cooling system: to
avoid the main tower body wall temperature is too high and the
receiving effect of the adsorption tower in the cone wall material
by high temperature and coking softening phenomenon, ensure the
quality of the materials.
5,Product collection system
The utility model is composed of a cyclone separator and a water
film dust collector
6,Cold desiccant charging system
It is composed of air filter, freezing dehumidifier, cleaning pipe
and so on. The system sends the fresh air to the clean area and
collects the cooling air after the filtered fresh air passes
through the refrigeration dehumidifier
7,Other auxiliary system
Are well-known manufacturers of supply, reliable performance; some
pipes take into account a certain angle design, the use of
suppression stainless steel pipe, to avoid the end material,
blocking material, and local resistance is too large, affecting the
phenomenon of material delivery
Technical Data:
Item / Model (GLP) | 5 | 25 | 50 | 100 | 150 | 200 | 500 | 800 | 1000 |
Inlet temperature (℃)) | 140-350 Automation | ||||||||
Outlet temperature (℃)) | 80-90 | ||||||||
Spray pattern | High speed centrifugal atomizer (mechanical drive/stepless
frequency control to choose) | ||||||||
Water evaporation (kg / h) | 5 | 25 | 50 | 100 | 150 | 200 | 500 | 800 | 1000 |
Atomizer speed (rpm) | 25000 | 22000 | 21500 | 18000 | 16000 | 13000 | 12000 | ||
Atomizing disc diameter (mm) | 60 | 120 | 150 | 180-210 | |||||
Electric heating maximum power (kw) | 8 | 31.5 | 60 | 81 | 99 | Equipped with other heat sources | |||
Powder recovery (%) | about 95% more | ||||||||
Covering length (m) | 1.6 | 4 | 4.5 | 5.2 | 7 | 7.5 | 12.5 | 13.5 | 14.5 |
Covering width (m) | 1.1 | 2.7 | 2.8 | 3.5 | 5.5 | 6 | 8 | 12 | 14 |
Tower height (m) | 1.75 | 4.5 | 5.5 | 6.7 | 7.2 | 8 | 10 | 11 | 15 |
Nozzle lifting height (m) | - - | 2.5 | 2.5 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 |
Note: The above data for reference only. Moisture evaporation and
material properties, solid content and the hot air inlet
temperature. Users can select the heating mode according to the
local energy situation, select the collecting, dedusting method
according to the material characteristics. | |||||||||
Service Terms:
Delivery Time: 75 days after prepayment. Destination port: the Port
at your option
Term of Payment: T/T, L/C. 30% TT prepaid, and 70% balance payment before shipment.
Package: Export standard and sea worthy wooden case.
Port of Shipment: Shanghai or Ningbo port.
Warranty: Guarantee 12 months since installation and no more 16
months after delivery.
Other Terms: 100% brand new, manufactured in the year 2022. Origin
of Goods: Jiangu, China.
Nozzle Jet Atomization Large Capacity Centrifugal Spray Dryer In Pharmaceutical
Inquiry Cart
0