Product Details
Autopilot Jetson AGX Xavier Industrial Embedded PC Board Module
Embedded System Development Board NVIDIA Jetson AGX Xavier
Industrial Carrier Board Y-C9-AGXi Development Board
NVIDIA Jetson AGX Xavier series modules integrate a 256-bit wide
LPDDR4X memory interface implemented as eight 32-bit channels with
x16 subpartitions. The memory controller provides a single read or
write command and row address to both sub-partitions in thechannel
to transfer 64 bytes, but provides three independent column address
bits to each sub-partition, allowing it accessdifferent 32 byte
sectors of a GOB between the sub-partitions. It provides
connections between a wide variety of clients,supporting their
bandwidth, latency, quality-of-service needs and any special
ordering requirements that are needed. TheMSS supports a variety of
security and safety features and address translation for clients
that use virtual addresses.NVIDIA Jetson AGX Xavier series modules
have two power inputs: 1) a 5V Regulator input and 2) a 9V - 20V
input. Power isthen supplied to the devices on board through a
power management IC (PMIC) and dedicated voltage regulators; all
internalmodule voltages and IO voltages are generated from this
input. An optional back up battery can be attached to the
VCC_RTCmodule input (this will maintain the on system RTC, when VIN
is not present). VIN must be supplied by the carrier board thatthe
Xavier module is designed to connect to.
Nvidia Development Board NVIDIA Jetson AGX Xavier Industrial
Y-C9-AGXi
Feature and Specifications
Product Name | Y-C9-AGXi |
Module | NVIDIA Jetson AGX Xavier Industrial |
AI Performance | 30 TOPS |
Memory | 32GB 256-bit LPDDR4x (ECC support) 136.5GB/s |
GPU | NVIDIA Volta architecture with 512 NVIDIA CUDA cores and 64 Tensor
cores |
Vision Accelerator | 2x PVA |
CPU | 8-core NVIDIA Carmel Armv8.2 64-bit CPU 8MB L2 + 4MB L3 |
DL Accelerator | 2x NVDLA |
Storage | 64GB eMMC 5.1 |
Networking | 10/100/1000 BASE-T Ethernet |
UPHY | 8x PCIe Gen4 3x USB 3.1 Single Lane UFS |
Camera | Up to 6 cameras (36 via virtual channels) 16 lanes MIPI CSI-2 D-PHY 1.2 (up to 40 Gbps) C-PHY 1.1 (up to 62 Gbps) |
Power | 20W | 40W |
Display | Three multi-mode DP 1.2a/e DP 1.4/HDMI 2.0 a/b |
Other I/O | USB 2.0 UART, SPI, CAN, I2C, I2S, DMIC & DSPK, GPIOs |
Company Profile
Beijing Plink-Ai is a high-tech company integrating research and
development, production and sales and one of the industry and civil
intelligence device wholly solution supplier. Founded in 2009,
Beijing Plink-AI always persists on
‘creation+efficiency+Intelligence’ core theory, focuses on products
and application tightly combination,exploring GPU to cloud -to-end
solutions. Through in-depth cooperation with customers, we have
accumulated valuable experience from cloud servers to edge side AI
product deployment.

As leading by game graphics card, professional graphics card, GPU
server, embedded AI all-in-one machine products, it serves for
cloud services, smart healthcare, smart agriculture, smart
logistics, smart city, industrial automation, education and
scientific research etc. That would promote the transformation from
traditional production mode to intelligent mode in various
industries.
Company is located in the centre of economic, science and
technology- Beijing, concentrated research and development
resources. We have vibrant, highly educated, strong research and
development ability’s team members and more than 10 years of
high-end hardware and software development experience. Beijing
Plink-AI Technology is one of the NVIDIA global elite partners and
Leadtek special agents.