

Add to Cart
2mm Thick Easy Installation IXPE Foam With Holes Acoustic Floor Underlayment
Introduction:
IXPE is a basic type of flooring underlay, it is an important
moisture barrier and cushioning, it is also a very important
ingredient in producing a floor with a quality sound. With foil
backing will increase the property of thermal plus.
Suitable area:
Laminate floor, wood floor, engineered floor, hardwood floor,
floating floor, sub-floors, etc.
Feature
Get sound absorbtion to reduce impact and click noises.
Use IXPE underlay to smooth out the undulations in your floor
Hollow step sounds are also absorbed to give you a more muted walk effect. Much more so than it would be without an underlay
Provide your wood floors with IXPE for moisture protection coming off the sub floor with its silver backing.
Creates a vapor/moisture resistant floor
Meets minimum requirements for most brands of flooring
Mold and mildew resistant
Includes adhesive strip and overlap film for linking multiple rolls
cushions flooring
Description | IXPE foam with holes | |||||
Color | GREEN | |||||
Density | 33kg/cbm | |||||
Roll size | 200 sq.ft | |||||
Thickness | 2mm | |||||
Coaing | PE film |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free
of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to
keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section
using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping
film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is
flush up against the other piece of underlayment and on top of the
overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.