

Add to Cart
2mm Smooth IXPE Foam With PE Film For Wood Flooring For Sound Proofing
Introduction:
This is designed for floating floor installations - laminate,
hardwood and bamboo. A Premium closed cell structure underlayment
with attached moisture barrier. It reduces through the floor sound
transmission while providing a sound similar to traditional wood
floors. It is recommended for use over both wood and concrete
subfloors to help smooth out imperfections. Its material is Non
allergenic, mold and mildew resistant, a sound similar to
traditional wood floors. Recommended for use over both wood and
concrete subfloors to help smooth out imperfections. Non
allergenic, mold and mildew resistant. subflooring.
Suitable area:
Laminate floor, wood floor, engineered floor, hardwood floor,
floating floor, sub-floors, etc.
Roll Cover: | 18.6m2 |
Roll Width: | 1100mm |
Roll Overlap | 100mm |
Thickness | 2mm |
Moisture Resistance Foil | PE film |
Material: | IXPE |
Antimicrobial: | No |
Moisture Resistant | Yes |
Cushioning: | Yes |
Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free
of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to
keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section
using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping
film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is
flush up against the other piece of underlayment and on top of the
overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.