Alloy 20 N08020 2.4660 Nickel Alloy Round Bar Normalizing Heat treatment

Alloy 20 N08020 2.4660 Nickel Alloy Manufacturer Nickel Alloy Supplier

Alloy 20 is a nickel-iron-chromium based, austenitic alloy with excellent corrosion resistance in chemical environments containing sulfuric acid and many other aggressive media. This alloy is stabilized with niobium to resist intergranular corrosion. Alloy 20 may provide potential cost savings when carefully compared to higher nickel-based alloys, while out performing standard stainless steels.

Alloy 20 has very good resistance to sulfuric acid. This alloy also shows suitable resistance in phosphoric acid, nitric acid and aqueous salt solutions. Alloy 20 is an excellent option when chloride stress corrosion cracking is an issue, as it resists pitting and crevice corrosion. Caution should be taken in chloride ion containing environments because the corrosion rate can increase significantly.

• Excellent resistance to hot sulfuric acid
• Resistant to intergranular corrosion in the as-welded condition
• Chloride stress corrosion cracking resistance

Nickel steel alloy20 N08020 2.4660 application

Guangda introduction

Zhangjiagang Guangda Special Material Co.,Ltd was established in 2003, is one of the forging manufacturer for research and development, production, sales, service as one of the comprehensive company. We located in Jiangsu Province besides Shanghai. We provide different forgings of shaft ,gear blank , ring rolling, rough machining, heat treatment and finish machining. Our annual production capacity is 500,000 tons for various of free-die forgings, ring rollings .

Guangda special alloy material products include high temperature alloy, corrosion resistant alloy, ultra-high strength steel, etc. High temperature alloy is mainly based on iron, nickel, cobalt, can be above 600℃ high temperature and a certain stress under the action of long-term work of metal materials, with excellent high temperature strength, good oxidation resistance, thermal corrosion resistance, fatigue and fracture toughness properties. Special alloy products have excellent high temperature tensile strength, good oxidation resistance, corrosion resistance.

The products are mainly used in aerospace, Marine petrochemical, nuclear power, petrochemical, aerospace, semiconductor chip equipment pipe valve.

Guangda has professional and completed line for the special smelting line and could provide different kinds of high temperature alloy, corrosion resistant alloy, ultra-high strength steel, etc.

alloy 20 round bar

alloy 20 supplier

nickel alloy round bar

Zhangjiagang Guangda Special Material Co.,Ltd was established in 2003. We located in Jiangsu Province beside Shanghai. Act as the high-tech enterprises with high-quality special alloy materials as the core business belong to the "advanced iron and steel materials" industry under the strategic emerging industries supported by the state.

1. Headquarter Zhangjiagang 220.000㎡ 2. Rugao Base 420.000㎡

3. Zhangjiagang Precision Manufacturing Base 200,000㎡ 4. Deyang Base 350.000㎡

Guangda Main products.

1. Material :
Gunagda has formed more than 10 core technologies in material melting technology and has internationally advanced heat treatment production lines from smelting and forging. Annual capacity for high quality alloy ingot 500,000 tons .Guangda provide high quality gear steel, high quality die steel, special stainless steel, high temperature alloy, ultra-high strength steel and other new material products encouraged by the state.

2.Forgings:
Guangda provide different forgings of shaft ,gear blank , ring rolling, rough machining, heat treatment and finish machining. Our annual production capacity is 500,000 tons for various of free-die forgings, ring rollings .Guangda forgings are widely used in high-end equipment manufacturing industries such as new energy wind power, rail transit, mechanical equipment, aerospace, new energy power, gas turbine, Marine petrochemical, semiconductor chip equipment and so on.

3.Castings:
Our business mainly focuses on large casting equipment, and our products mainly include large wind turbine castings, large equipment and equipment castings, large plastic machinery castings, and large shell castings with a total annual capacity of 210,000 tons. We have formed a whole industrial chain of smelting, casting, machining and surface treatment, and our technology and cost control are leading in the world.

4.Precision machining parts:
Through continuous and high starting point technical transformation. Guangda has introduced world-class high-precision equipment for the gears manufacturing, established a complete quality management system and after-sales service network, and dedicated itself to providing users with high-quality products. Quality products and satisfactory service.​All products are manufactured with the most advanced and modern equipment of PAMA,Gleason,Danobat,Kehren,Nicolas,Pierto carnaghi and efficient technical team with an emphasis on cost effective production.Guangda pursues excellence & innovation with tight quality control & the most advanced technology in the industry.