1x8 PON PLC Fiber Optic Splitter With ABS Enclosure And SC Pigtail

1x8 PON PLC Fiber Optic Splitter With ABS Enclosure And SC Pigtail

PDL polarization loss is an important index to measure the fiber optic PLC splitter, but if the operation is not standard during the test process of PLC splitter, it will bring large error and affect the accuracy of the test. So how to reduce the measurement error and form good habit for PDL test of fiber optic PLC splitter?

1. The light source for PDL measurement must be a high stable light source. The short term stability of the light source should be roughly equivalent to the expected PDL measurement accuracy. If you want to achieve the measurement accuracy of PDL 0.02dB, source of short-term power stability must be higher than 0.02dB.

2. It is suggested that an isolator be added at the input end of the test instrument to reduce the light reflected from the downstream connector and the device to be measured into the light source.

3, In order to reduce the reflection light into the light source, thus reducing the resulting light instability, the APC fiber connector should be used between the light source and the test instrument.

4, The polarization state of the light source should be relatively stable. The rapid fluctuation of the polarization state of the light source will result in the fluctuation of the measurement results.

5, The wavelength of the light source should be relatively stable. Because birefringence exists in optical fiber between the light source and the measuring instrument, so fast fluctuation of the wavelength of the light source will cause the rapid fluctuation of the polarization state.

6. Fiber optic jumper with smaller PDL should be used to connect the device to be measured.

7. In order to reduce the measurement error caused by secondary reflection, the APC fiber connector should be used to input the light into the measuring instrument and the device to be measured.

8. In order to reduce PDL effect of connector, the PC connector should be used to introduce the output light of the device to the measuring instrument. The output light of the PC connector will be directly injected into the free space photodetector inside the measuring instrument. If use APC connector here, it will generate 0.03 to 0.04 dB PDL error.

9. Because the bending will produce a PDL that can not be ignored in the optical fiber, the fiber between two connectors should not have a strong bending or tight winding.

Technical Specifications Of 1x8 PON Fiber PLC Splitter

Note: The size is for reference only and we are able to provide different size, the final dimension should be in compliance with specification.

Main Advantages Of Begate Fiber Splitter:

1, High precision;

2, Stable performance;

3, 100% tested and qualified before leaving factory;

4, Easy to indentify fiber channel;

5, Factory direct sell and fast delivery;

6, Customized requirements are welcome.

Other Options:

Shenzhen Begate is a leading professional manufacturer of advanced fiber optic products established in 2010. Our headquarter located in Shenzhen, China. We have standardize workshop of 6500sqm and over 300 employees. “Quality is our Culture!” Our well-equipped facilities imported from Germany, Japan, and USA for excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction.

In addition to our self-produced MPO MTP fiber cable, patchcord, pigtails , fast connectors and PLC splitter products, we also provide one-stop shopping. Begate products are as follows:
Fiber Optic Cable: Indoor cable, Outdoor cable, Armored cable, FTTH Drop cable

Passive products: MPO MTP fiber cable, Patchcords, Pigtails, Loopbacks, Fiber Optic Connectors, Fiber Optic Adaters, Fiber Optic Attenuators, PLC splitter, FBT coupler, CWDM, DWDM, MPO MTP Cassettes, MPO MTP Patch Panel, and all related accessories.
FTTH System: Fiber enclosure, Termination box, Distribution box, Distribution Cabinet, Quick Assembly Connector, Merchanical Splicer, Cleaning Products
Fiber Optic Equipment: Produce Equipment and Test equipment
Active FO Products: Media Conveter, SFP Transceivers, Vedio converter

We have received ISO, RoHS, CNAS, and high-tech enterprise certifications. Meanwhile, a number of technological innovations have been applied for and awarded national patents.

As a result of our high quality products, reliable OEM&ODM services, and outstanding customer services, we cooperate with many world-famous large communication companies. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to WIN-WIN successful business relationships with customers around the world.