

Add to Cart
Pump Out Reverse Circulating Valve / Circulating Sub For Drill Stem
Testing Service
The Pump Out Reverse Circulating Valve is a Hollow Plug Impact type
Circulating Sub. The Pump Out Reverse Circulating Valve is used in
the more difficult well testing operations, where depth and
high-pressure differential across the plug sometimes make it
difficult to open a conventional reversing sub.
The Pump Out Reversing Sub allows removal of free oil or gas in the
pipe (minimizing the risk of fire) while the tool is coming out of
the hole. It is also used to circulate and condition the drilling
fluid when necessary.
The Pump Out Reversing Circulating Valve / Circulating Sub also
equipped with a shear pin with plate to be a backup device in case
the plug can not be broken by flute bar, applying the tubing
pressure, the pin can be sheared by the pressure and build the
communication.
Technical parameter of Pump Out Reverse Circulating Valve
1 | OD | 5”(127.5mm) | 4.25”(108mm) | 6.25”(158.8mm) | ||||||||||||||||||||||||||||||||||||||
2 | ID | 57mm | 45mm | 82mm | ||||||||||||||||||||||||||||||||||||||
3 | Length | 500mm | 450mm | 520mm | ||||||||||||||||||||||||||||||||||||||
4 | Working Pressure | 35Mpa(5000psi) | 35Mpa(5000psi) | 35Mpa(5000psi) | ||||||||||||||||||||||||||||||||||||||
5 | Tensile Strength | 2034KN | 1418KN | 2882KN | ||||||||||||||||||||||||||||||||||||||
6 | Burst Pressure | 165Mpa | 156Mpa | 182Mpa | ||||||||||||||||||||||||||||||||||||||
7 | Collapse Pressure | 148Mpa | 146Mpa | 168Mpa | ||||||||||||||||||||||||||||||||||||||
8 | Torque Strength | 43kN.m | 21.6kN.m | 55kN.m | ||||||||||||||||||||||||||||||||||||||
9 | Working Temp. | -29oC~180oC | ||||||||||||||||||||||||||||||||||||||||
10 | Service | H2S NACE MR0175(Above 175F) | ||||||||||||||||||||||||||||||||||||||||
11 | Connection Thread | 3 1/2” /EUE/IF/ | 3 1/2” /EUE/IF/ | 4 1/2” IF Box Pin |