E2 ELISA Test Kit In Vitro Detection Medical Detection High Precision
Brand Name:BIOVANTION
Certification:ISO 13485
Model Number:TY0031
Minimum Order Quantity:1000 Box
Delivery Time:2-7 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
Room230/232, Building 1, No.538 YongfengTun, Haidian District, Beijing
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
E2 ELISA Test Kit
INTENDED USE
Detection Kit for Estradial (E2)(ELISA).It is used in quantitative tests for Estradial in human serum.
Product list
| Product details | Description |
| Delivery | Within 48 hours |
| Packaging Specifications | 8 x 12 strips, 96 wells |
| Country Of Origin | China |
| Manufacturer | 18 months |
| Preservation method | 2℃-8℃ |
| Specimen | Whole blood |
| Assification | class1 |
| Type | Elisa Test Kit |
PRINCIPLE
E2 kit is based on competitive method. Coat micro well plates with E2 antibody. Add E2 calibrator (or patient sample) and HRP-E2 to form E2-antibody—HRP-E2 complex. The binding amount of HRP-E2 is reversely proportional to E2 content in serum. Remove the unbound E2-HRP. Add substrate and detect absorbent value. Calculate E2 content of patient serum through computer or plotting fitting
concentration-absorbent value curve.
MAIN COMPONENTS
Coated Microplate: 1 plate (8×12 wells), Ready to use. Coated with anti-T4 antibody and sealed in an aluminum bag. Remove the strips in the resealable bag with a desiccant to protect from moisture after opened. Store at 2~8℃ until expiration date.
- Biotin-T4: 1 vial of 6ml, Ready to use. Store at 2~8℃ until expiration date.
- Avidin-HRP Conjugate: 1 vial of 6ml, Ready to use. Store at 2~8℃ until expiration date.
- Calibrator: 6 vials of 1ml, Ready to use. Labeled with S0 to S5 and the concentration of T4 is 0,20,40, 80,160,320 ng/ml. Store at 2~8℃ until expiration date.
- Control: 2 vials of 1ml, Ready to use. Labeled with high value and low value. Store at 2~8℃ until expiration date. The concentration of low value is 44.3~82.3 ng/ml. The concentration of high value is 112~208 ng/ml.
- Chromogen A: 1 vial of 7ml, Ready to use. Store at 2~8℃ until expiration date.
- Chromogen B: 1 vial of 7ml, Ready to use. Store at 2~8℃ until expiration date.
- Stop Solution: 1 vial of 7ml, Ready to use. Store at 2~8℃ until expiration date.
- Wash buffer: 1 vial of 15ml, Concentrate 20-fold, diluting with deionized water before the assay. Store at 2~8℃ until expiration date.
- Plate sealer: 2 pieces.
- Plastic resealable bag: 1 set.
- Instruction manual: 1 copy.
RELATED TIPS
- This kit is designated for In-Vitro Diagnostic Use Only.
- Wash procedure. Incomplete washing will adversely affect the test results. Wash each well 3 times with about 0.3ml diluted washing solution. If no automatic washer is available, washing can be performed manually as follows: Invert the plate vigorously to get all water out and block the rim of well on absorbent paper for a few seconds. Filling each well with diluted washing solution and remain 10 seconds. Repeat these steps 3 times. Blot dry the plate by inverting the plate onto absorbent tissue, and striking a hard surface several times.
- Drip procedure. Mix the bottle gently before use. Violent surge may cause too much foam. Invert the bottle and squeeze one or two drop on absorbent tissue to make sure there is no foam. Take the bottle upright the well and make sure the drop does not touch the rim of wells.
- Storage. The whole kit should be stored at 2~8℃ for one year. Microplate should be taken to room temperature before opened. This is very important because absorbed atmospheric moisture by cold plates significantly reduces their shelf life. After removing the required number of strips, the plate should be put in the plastic resealable bag with desiccants to minimize exposure to damp air.
- Read Procedure. Determine the absorbance (OD) of each well at 450nm with a microtiter plate reader. Using the blank well to correct the zero point of reader if single wavelength reader is used. If double wavelength readers with 450nm and 630nm are used, there is no need to correct the zero point.
- Control serum is prepared with human serum, which is tested negative of HBV, HCV and HIV. But it should still be considered as capable of transmitting viral diseases.
PREPARATIONS
1. Allow all specimens and reagents to reach room temperature
(~25°C) and mix thoroughly by gentle inversion before use.
2.Prepare Wash Buffer by diluting Wash Concentrate 20-fold with
deionized water. The diluted wash solution is stable in room
temperature for at least one week.
ATTENTIONS
1. Do not exchange reagents from different lots or use reagents
from other commercially available kits. The components of the kit
are precisely matched for optimal performance of the tests.
2. Specimens with Hyperlipidemia and icterus show no effects on the
detection results. But specimen with severe hemolysis will affect
the color of the result, other test methods are suggested to use.
3. Allow the reagents and specimens to reach room temperature
before use. Shake reagent gently before use.
4. Concentrated washing liquid will produce crystal at room
temperature, should be diluted completely before use.
5. Never reuse microplate sealing membrane.
6. Samples containing anti-sperm antibody, anti-endometrial
antibody will not affect the results.
7. Each component of the kit was inactivated, however, it should be
regarded as potentially infectious.
PRECAUTION FOR USERS
1. Handling should preclude any pipetting by mouth. Use only
pipettes with disposable tips for each specimen.
2.Do not mix materials from different master lots. Do not use kit
components beyond the expiration date.
3.All materials should be brought to room temperature before use.
E2 ELISA Test Kit In Vitro Detection Medical Detection High Precision
Inquiry Cart
0