DN76 Gas Desulfurization Tower PP Saddle Ring Packing High Mechanical Strength

DN76 PP Gas Desulfurization Tower Different Saddle Ring Plastic Random Packing

Different Saddle Ring Plastic Random Packing

DN76PP different saddle ring packing for gas desulfurization tower directly sold by manufacturers Therefore, the processing capacity of the torque saddle ring is higher, the pressure drop is small, and the mass transfer performance is improved. The plastic heterosaddle ring packing is similar to the shape of a saddle. This packing layer is mainly an arc-shaped liquid channel.

The gap in the packing layer is more continuous than that of the annular packing, which can make the gas flow mainly along the arc-shaped channel when it flows upwards. This packing layer is mainly an arc-shaped liquid channel, and the voids in the packing layer are more continuous than the annular packing (especially compared with the Raschig ring packing), which can make the gas flow mainly along the arc-shaped channel when it flows upward.

Different Saddle Ring Plastic Random Packing Material:

To meet the needs of our customers, we produce Pall rings in many different materials:

PP (Polypropylene)
PE (polyethylene)
PVC (polyvinyl chloride)
CPVC (Corzan®)
PVDF (Kynar®)
PFA (Teflon®)
Both PE and PP are low-density plastics with low compressive strength and are suitable for temperatures up to 90˚C or 100˚C, respectively. PVDF is the densest option and has the highest compressive strength. It is suitable for temperatures up to 150˚C. PVC has good density but is only suitable for temperatures up to 60˚C.

Different Saddle Ring Plastic Random Packing

Factory direct sales of gas desulfurization tower DN76PP different saddle ring packing is mainly based on the meticulous transformation of the arc saddle ring, but there is still a certain difference between the two. The shape, and this just happens to be more consistent with its title. This avoids the occurrence of non-uniform conditions in the interstices of the bed caused by nesting, thereby improving the distribution of the liquid in the interior.
DN76 plastic iso-saddle ring packing is used in packing towers in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries. It has the characteristics of sufficient, small specific gravity, high mass transfer efficiency, pressure drop, large flux, high efficiency, large load elasticity, and good pollution resistance.

Different Saddle Ring Plastic Random Packing Advantages

1. Special structure, large flux, low-pressure drop, and good impact resistance.
2. Strong resistance to chemical corrosion and large void space.
3. Energy saving, low operating cost, convenient loading, and unloading.
4. Low resistance.
5. High operational flexibility.
6. High mechanical strength.
7. Chemical resistance, such as acid, alkali, and salt.
8. Temperature stability.
9. Various internal shapes. Can be adapted to different applications.
10. Sturdy and durable, suitable for deep-packed beds.

Applications

Plastic Pall rings are one of the most commonly used column packing materials in gas-liquid separation applications. Because of their ability to withstand corrosive environments, they are the mainstay of chemical process towers.

1. water treatment
2. drinking water applications
3. CO2, SO2, HCl, and HF absorption or stripping
4. Chlorine absorption in water or caustic
5. odor control

Different Saddle Ring Plastic Random Packing size customizable

FAQ

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

Anping Anhesheng Hardware Mesh Products Co., Ltd., our company has been committed to the field of industrial filtration for many years, with filter elements, filter accessories, bridge guardrails, industrial dust removal and other related products, 14 years of export experience, since 2007, our company It has established business in many international regions such as Europe, the Middle East, Southeast Asia, North America, etc., and has served with many global companies, aiming to build a benchmark in the field of industrial filtration and separation. The company has more than 40 sets of production equipment, and the wire mesh demister is one of our main products. Our employees are operation, maintenance and installation personnel with many years of practical experience, who can provide customers with the required tank filtration. Engineering consulting and solutions, customized design and service are our core service tenets, and also solve your multiple concerns during use.
Our company has nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh and other metal products. We have ISO9001 certification and EU quality system certification. We promise that all products received by our customers have passed the quality inspection standards and have perfect performance. We have different specifications, in addition to standard and specific sizes, of course, customization is also our main direction, we are professional, you are more assured.
During the development of our company, we have visited customers many times and provided customer factory inspection services, professional technical accompaniment to explain the introduction, the whole process of the real plant and equipment environment, so that you can truly see your product production process, we can also provide real factory inspection, high-definition The video of the same frequency with your real-time interaction, solve your worries. The praise from thousands of customers is the best recognition for us. At the same time, because of the trust of customers, our company's production capacity maintains an annual growth rate of 30%-40%. Our company's vision: professional, precise, elite, we will wholeheartedly provide you with cost-effective products, high-quality engineering design and services.
All staff of Anping Anhesheng Hardware Mesh Products Co., Ltd. look forward to your cooperation