Rubber Goyen Solenoid Pulse Valve Diaphragm K10200 K10201 CA102MM RCA102MM

K10200 K10201 Diaphragm For Goyen Solenoid Pulse Valve CA102MM RCA102MM

Brief introduction of electromagnetic pulse valve diaphragm:

The electromagnetic pulse valve diaphragm is a whole piece of rubber diaphragm installed with a riveting head used to block the compressed air pipeline or the air outlet of the blocking valve, a venting unloading hole and a bolt hole for fixed support around it. It is the key control part in the electromagnetic pulse valve.

K10200, K10201 Diaphragm for Goyen pulse valve CA102MM, RCA102MM; NBR material is standard, working temperature range is -5 to +80 ℃; material is optional, for high temperature, working temperature range is -10 to +120 ℃. Pulse valve, also called diaphragm valve acts as a "switch" for compressed air in the dust clean blowing system for pulse bag filters. It is controlled by the electric signals from the pulse jet control device. This system cleans the filter bags cluster by cluster with high-pressure blowing to keep the pressure resistance of the baghouse within a pre-set range, and thus ensure the processing capability and the dust-collecting efficiency of the baghouse.

Working principle:

The electromagnetic pulse valve diaphragm divides the pulse valve into two air chambers. When the pressure of the rear air chamber makes the diaphragm close to the air outlet of the valve, the pulse valve is in a closed state, the pulse controller outputs a signal to move the armature of the pulse valve, the vent hole of the air chamber behind the valve is opened, and the rear air chamber quickly loses pressure, making the The diaphragm moves backward, the compressed air is blown through the outlet of the valve, the pulse valve is in the open state, the injection starts, the electrical signal output by the pulse controller disappears, the electromagnetic pilot of the pulse valve is reset, the vent hole of the rear air chamber is closed, and the back When the pressure of the air chamber rises, the diaphragm of the pulse valve is close to the air outlet of the valve, the pulse valve is in the closed state, and the injection stops. The length of the injection time is controlled by the controller.

Structural properties:

The operating temperature range and pressure range of the diaphragm itself depends on the type of rubber, fabric and structure. The diaphragm can work under the conditions of -50~100 degrees Celsius and 0.4~0.8MPa; the fluororubber and silicone rubber diaphragms can work under the conditions of -80~232 degrees Celsius. Chlorohydrin rubber diaphragm can work under the pressure of 0.4~0.8MPa, has good air tightness, anti-aging, and its life is equal to that of engine overhaul.

Our service:

1. Packaging is neutral packing or customized packing.

2. We will reply you within 24 hours.

3. We will also provide you with good after-sales service.

4. OEM or ODM orders are welcomed.

5. Trial orders are acceptable.

6. High quality and factory price.

7. 100% ensured the quality.

Hongum is specialized in research, production, sales, and distribution. It is located in the base of technology transfer of CAS, committed to research and development of new materials in both rubber and plastic industry.

Hongum supply various of rubber diaphragms, dampers and all kinds of other rubber and plastic hardwares for boat, yacht, wharf and sea farm industries, such as marine float, fast ray paddle, and other boat and wharf rubber and plastic accessories.

We have a full set of advanced production equipment from vulcanizing to final shipment, with international standards, using the same advanced production process, also have a full range of laboratory testing equipment, can conduct comprehensive experiments and test a variety of rubber and plastic material properties, also product performance tests. We have the most professional technical team which can integrate your idea and provide the best professional advice. With the most professional service and stable quality we have won the unanimous approval of the majority of domestic customers, and exported to Russia, the United States, Canada, Britain, India, Singapore and other international markets.

We always adhere to the "service-oriented, innovative, and provide customers with professional solutions" concept to create value, to achieve the cooperation successful and win together.

Our team has a number of person who love new material industry, full of passion, and the same mind. Our needs are derived from the public, we have the professional technical team for seal integration, we are your all-perspective communication consultant.