

Add to Cart
Tilmicosin Rapid Test Strip for Milk 96 Tests/Kit Detection limit 5 ~ 8 ppb
1. Milk Test Kit Specifications
8 strips/bottle, 12 bottles/kit
2. Milk Test Kit Introduction
Tilmicosin rapid test strips are used for qualitative detection of tilmicosin residues in milk (including pure milk and fresh milk) and goat milk. The whole test only takes 6 minutes, and the sensitivity is high and the operation is simple.
3. Detection limit: 5~8ug/kg (ppb)
4. Tilmicosin Rapid Test Strip Contents
Tilmicosin test strip | 8 strip/bottle |
Red powder micro-well | 8 micro-well/bottle |
Desiccant | 2 piece/bottle |
Instruction | 1 piece |
5. Tilmicosin Rapid Test Strip Principle
The Tilmicosin rapid test strip is based on competitive inhibition
immuno-chromatographic principle. In the flow process, Tilmicosin
in the sample combined with Tilmicosin specific colloidal
gold-labeled monoclonal antibody, Inhibit the combination between
antibody and Tilmicosin-BSA conjugate on Test line of NC membrane,
lead to the color change of Test line. When the sample has no
Tilmicosin residue or concentration lower than detection limit, T
line is darker then C line; when the concentration is equal to or
higher than detection limit, T line is lighter than C line or T
line has no color or T line has same color with C line. No matter
whether there is Tilmicosin residue in sample, C line will appear,
it means the test is valid.
6. Operation procedures
6.1 Please read the manual carefully before use. Return the test
strip and sample to room temperature.
6.2 Take out the required bottle from the kit, take out the
required microwell, make the appropriate mark, please use it within
1 hour. Please seal the cap of the unused micropore to avoid
moisture.
6.3 Use a micropipette to take 200ul of the sample into the
microwell, repeat the aspiration 5 times, and thoroughly mix the
sample with the reagent in the microwell until there are no solid
particles visually judged (this is a very important step).
6.4 Incubate at 40±2°C for 3 minutes. Then insert the test strip
into the microwell and place the end with the MAX into the liquid.
6.5 Insert the test strip into the liquid for 3 minutes, then read
the result, and judge the result according to the result diagram or
description of the instruction manual.
7. Test Result Interpretation
Color depth comparison of T line and C line | Result judgment | Result analysis |
T line > C line | Negative | Tilmicosin residue is lower than detection limit in sample |
T line = C line | Weak positive | Tilmicosin residue is equal to detection limit in sample |
T line < C line or T line is invisible | Positive | Tilmicosin residue is higher than detection limit in sample |
C line is invisible | Invalid | The test strip is invalid, test again |
8. Precautions
1) Use test strips at room temperature, please do not use expired
test strips.
2) Cap the bottle immediately after removing the reagent. If the 8
microwells cannot be used at the same time, immediately cap the
microwells, put them back in the bottle, and store in an airtight
container with proper storage methods.
3) Do not touch the white film surface in the middle of the test
paper, avoid direct sunlight and direct blowing of fans.
4) The milk sample should be completely liquid, free of lumps,
sourness and precipitation.
5) Use the test strip again for a positive result.
9. Specificity
This product has no cross-reaction with quinolones, sulfonamides,
tetracyclines, etc.
10. Storage and expiration date
Storage: 2-8 ℃ dark, sealed, dry place, do not freeze.
Expiration date: 12 months; production date is on the box.
Q1: When will it be shipped?
A1: We will ship the goods for you as soon as possible within 7
working days after receiving the payment. (In case of external
factors such as the epidemic, the delivery may be delayed)
Q2: Does it support OEM/ODM?
A2: It can be supported, but the specific quantity needs to be more
than 100,000 pieces to facilitate customized products.
Q3: How is your factory doing in terms of quality control?
A3: We have ISO9001 and ISO13485 certified by the state. Our
production process is in accordance with the standard process,
which can ensure that the quality of the products is optimal.
Q4: How is after-sales service provided?
A4: We provide professional online technical after-sales service.
We can provide you with one-on-one guidance in the form of video,
phone calls, etc.
Q5: What is the payment method?
A5: We receive payment by T/T.
Q6: How to ship?
A6: By obtaining quotations from our many cooperative carriers,
choose the best way to ship for you, or you can ship according to
your requirements.