Corrugated Perforated Plate 316 Stainless Steel Distillation Packing 200Y

200Y Metal Corrugated Perforated Plate Distillation Packing

1. 200Y metal plate structured packing has regular arrangement of components, uniform and regular gas-liquid flow channel is formed, so that gas-liquid contact in an orderly manner, so as to strengthen mass transfer, reduce amplification effect, reduce gas flow pressure drop and low liquid holding capacity.

2. Packed columns offer multiple benefits

3. 200Y matal plate distillation packing manufacturing Instructions:

• The punching, rolling fine grain (or rolling grain equivalent to fine grain) and corrugation of raw stainless steel belt shall be made into corrugation belt of orifice plate.
• The corrugation plate shall be cut into pieces according to different chord length on the cross section of packing plate.
• The packing plate is composed of a number of corrugated plates arranged vertically and evenly.
• The corrugation angle of the two adjacent orifice plates is overlapped in the opposite direction.
• The purpose of block type is to facilitate the installation of packing. Each block size shall be able to enter the tower from the manhole for assembly.
• For the block packing, the packing block close to the tower wall shall be made into the form of anti wall flow ring at the end close to the tower wall.
• The whole disc of packing shall be tightly clamped with steel belt, and the end of the hoop shall be lapped and spot welded to prevent the packing from deformation.
• The packing block with the same size and specification in the drawing is called "standard block", and the packing block with other sizes is called "non-standard block".
• There are three methods to construct the packing block: nailing through, spot welding and combination of both.
• The packing blocks shall be arranged evenly, and the disc surface shall be flat without unevenness.

4. 200Y metal plate structured packing Inspection and acceptance:

The whole packing disc assembled by mould shall be checked in batches, and the packing of each specification can be divided into batches according to the following table. When the order quantity of a certain type of structured packing is less than the batch quantity specified in the table below, the whole order can be regarded as a batch.

The sampling quantity of each batch of structured packing shall be 10% of the total number of disks, but at least not less than 2 disks.

For the packing blocks used for large and medium-sized towers, the supplier shall inspect them one by one layer with the method of pre-installation, and the buyer shall send inspector to the supplier's site for acceptance.

The inspected packing shall meet all inspection items specified in the contract.

Hi,How are you ,wish everything go on well at yours,

Thanks for your visting our website ,now i will make a brief introduction for you ,

From 1982 years,our boss Mr Du creat a store to sell wire mesh in Wuhan China,several years later,he go back our hometown Anping ,Wire Mesh Hometown in the world ,located his own Factory ,until now has 40 year's experience .

In Fact ,i do not want to introduct how many machine we have ,how many workers we have ,because i think you do not care that ,we have so many not important ,you only treat what we can offer you as the most important

We have about 40 year's experience ,can offer you better quality with competitive price ,if you are distributor ,we can support you sell more and more prdocut

If you are end user,we must promise the quality ,and let your withour any worriend .

I alway think ,business not only business,it is the relationship between you and me like friend ,Trust is the most focus,i hope we can have a cooperation in the future.