

Add to Cart
DV215FHM-NN0 voltage supply is 5.0V, frame rate is 60Hz, interface type is 30 pins LVDS (2 ch, 8-bit) , operating temperature: 0 ~ 50 °C ; storage temperature: -20 ~ 60 °C.
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.0.5t Glass
4.6-bit (Hi-FRC) color depth, display 16. 7M colors
5.Incorporated edge type back-light (One Light Bar)
6.High luminance and contrast ratio, low reflection and wide viewing angle
7.DE (Data Enable) only
8.RoHS/Halogen Free
9.ES 7.0 compliant
10.Gamma Correction
11.Reverse type
Specifications:
Parameter | Specification | Unit |
Active area | 476.064(H) × 267.786(V) | mm |
Number of pixels | 1920(H) × 1080(V) | pixels |
Pixel pitch | 0.24795(H) x 0.24795(V) | mm |
Pixel arrangement | RGB Vertical stripe | - |
Display colors | 16.7M | colors |
Display mode | Normally Black | - |
Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
Weight | 1.97 | Kg |
Bezel width (L/R/U/D) | 7.9/7.9/10.5/10.5 | mm |
Surface Treatment | Anti-glare, 3H | - |
Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remarks |
Power Supply Voltage | VDD | -0.3 | 5.5 | V | Ta = 25℃ |
Logic Supply Voltage | VIN | VSS-0.3 | VDD+0.3 | V | |
Operating Temperature | TOP | 0 | +50 | ℃ | |
Storage Temperature | TST | -20 | +60 | ℃ |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | |
Power Supply Voltage | VDD | 4.5 | 5.0 | 5.5 | V | |
Power Supply Current | IDD | - | 500 | 1200 | mA | |
In-Rush Current | IRUSH | - | 2.0 | 3 | A | |
Permissible Input Ripple Voltage | VRF | - | - | 300 | mV | VDD = 5.0V |
High Level Differential Input Threshold Voltage | VIH | - | - | +100 | mV | |
Low Level Differential Input Threshold Voltage | VIL | - 100 | - | - | mV | |
Differential input voltage | |VID | | 200 | - | 600 | mV | |
Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 | VIH=100mV, VIL=- 100mV | |
LED Voltage | VL | 2.8 | 3.0 | 3.2 | V | |
LED Channel Voltage | VL | - | 72 | 76.8 | V | |
LED Channel Current | IL | 80 | mA | |||
LED Lifetime | 30,000 | - | - | Hrs | I =80 mA | |
Power Consumption | PD | - | 2.5 | 6 | W | |
PBL | - | 17.3 | 18.4 | W | IL=80mA | |
Ptotal | - | 19.8 | 24.4 | W |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range | Horizontal | Θ3 | CR > 10 | 85 | 89 | - | Deg. | |
Θ9 | 85 | 89 | - | Deg. | ||||
Vertical | Θ12 | 85 | 89 | - | Deg. | |||
Θ6 | 85 | 89 | - | Deg. | ||||
Luminance Contrast ratio | CR | Θ = 0o (Center) Normal Viewing Angle | 700 | 1000 | ||||
Luminance of White | Yw | 480 | 500 | - | cd/m2 | |||
White luminance uniformity | ΔY | 75 | - | - | % | |||
Reproduction of color | White | W | 0.283 | 0.313 | 0.343 | - | ||
W | 0.299 | 0.329 | 0.359 | - | ||||
Red | R | 0.608 | 0.638 | 0.668 | - | |||
R | 0.327 | 0.357 | 0.387 | - | ||||
Green | G | 0.284 | 0.314 | 0.344 | - | |||
G | 0.608 | 0.638 | 0.668 | - | ||||
Blue | Bx | 0.122 | 0.152 | 0.182 | - | |||
By | 0.038 | 0.068 | 0.098 | - | ||||
Response Time | GTG | Tg | 14 | 20 | ms | |||
Cross Talk | CT | - | - | 2.0 | % |
Interface Connection:
Module Side Connector : UJU IS100-L30R-C23or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
Pin No | Symbol | Function | Remark |
1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) | |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) | |
3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) | |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) | |
5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) | |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) | |
7 | BIST | Bist function | Note1 |
8 | RXOC- | Negative Transmission Clock (ODD) | |
9 | RXOC+ | Positive Transmission Clock (ODD) | |
10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) | |
11 | RXO3+ | Positive Transmission data of Pixel 3 (ODD) | |
12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) | |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) | |
14 | GND | Power Ground | |
15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) | |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) | |
17 | GND | Power Ground | |
18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) | |
19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) | |
20 | RXEC- | Negative Transmission Clock (EVEN) | |
21 | RXEC+ | Positive Transmission Clock (EVEN) | |
22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) | |
23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) | |
24 | GND | Power Ground | Note 2 |
25 | CTL | *Reserved for LCD manufacturer’s(CTL_DVR) | |
26 | CE | *Reserved for LCD manufacturer’s(CE_DVR) | |
27 | NC | ||
28 | VDD | Power Supply: +5V | |
29 | VDD | ||
30 | VDD |
Note 1 : H: White-Black-Red-Green-Blue Pattern Aging, L:Black pattern , when no LVDS signal.
Note2: This pin should be connected with GND.
Handling Precautions:
1.Design the length of cable to connect between the connector for back-light and the converter as shorter as possible and the shorter cable shall be connected directly , The long cable between back-light and Converter may cause the Luminance of LED to lower and need a higher startup voltage.
2.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.