16.8V Portable Vine Tie Twisting Tomato Tying Tool Garden Vineyard 2Ah

16.8V Portable Vine Twisting Tools Garden Electric Tying Machine for Vineyard

This tying machine electric tying machine for garden flower fruit vegetable vine
The electric tying machine tool is made by special class steel, lighter body is easy for single hand operate. Excellent design make the tool safety, easy operation, efficiency in use. Just loose trigger, it will work. The maintainance is easy.

Technical parameter:

Characteristic:

1) Light Weight and Good Hand-Feeling
Adopt streamline design, accord with ergonomics, easy and comfortable to use for both right and left hands, no longer tired hand

2) Energy Saving and Environmental Protection Lithium Battery
Using lithium battery power. Two 16.8V 2Ah Li-ion batteries are equipped for each set.
fast charging, long lasting life, removable/detachable and rechargable lithium-ion battery

3) Large Twisting Design and High Efficiency
Easily handle max 25mm tying diameter, one tying 0.3 seconds

4) Adjustable Function
Four adjustable gears meet any tying requirement.

Install the rope
CAUTION: The tool shall use the specified rope.Other ropes may cause failure to install, tie failure, and / or damage the tool.
►The rope attached with this tool can be used directly and is an example of rope installation and a real sample reference for the purchase of rope.
►If the tie rope is out of replacement, follow the method below.

1. Remove the loading plate in the back direction.

2. Pull out the loading plate between left and right.

3. Install the new rope into the loading plate and press the loading plate.

4. Install the rope head up into the tool and wear the rope through the handle and arm according to the figure above (dotted line).Improper installation of rope may cause failure to tie properly or pull out difficult.

5. Press the handle to cut off the front material of the rope.

OPERATION

1. Turn on the power switch and open the tool binding arm.

2. Place the things to be tied into the binding arm.

3. Press the handle and release to secure the front end of the rope to the lower blade.

4. Open the binding arm and remove the binding arm along with the rope.

5. Press the handle again to the end, and the blade cut off the rope and wrap the rope.After the handle is pressed to the bottom, it should be kept for about one second. Too short time may lead to unwinding and loose release; too long time may lead to the winding belt fracture and the binding failure.

6. Release the handle and tie complete.

Warnings:

A )Work area safety

1. Keep work area clean and well lit.
2. Do not operate power tools in explosive atmospheres.
3. Keep children and bystanders away while operating a power tool.

B)Electrical Safety

1. Power tool plugs must match the outlet.
2. Avoid body contact with earthed or grounded surfaces.
3. Do not expose power tools to rain or wet conditions.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
6. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply.
7. Power tools can produce electromagnetic fields (EMF) that are not harmful to the user.

C)Personal Safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool.
2. Use personal protective equipment.
3. Prevent unintentional starting.
4. Remove any adjusting key or wrench before turning the power tool on.
5. Do not overreach.
6. Dress properly.
7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.

D)Power tool use and care

1. Do not force the power tool.
2. Do not use the power tool if the switch does not turn it on and off.
3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
5. Maintain power tools and accessories.
6. Keep cutting tools sharp and clean.
7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
8. Keep handles and grasping surfaces dry, clean and free from oil and grease.

E)Battery tool use and care
1. Recharge only with the charger specified by the manufacturer.
2. Use power tools only with specifically designated battery packs.
3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact.
5. Do not use a battery pack or tool that is damaged or modified.
6. Do not expose a battery pack or tool to fire or excessive temperature.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.

SERVICE
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
3. Follow instruction for lubricating and changing accessories.
4. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

Applicaton

This tool is suitable for loose fixation of wires.Such as the branches of plants and stent fixation, multilinear beam fixation, etc.

Other picture

Weiwo is professional manufacture and supplier of electric pruner and electric tying machine and li-battery garden tools company. The company is in NingBo and recognized as the world's in consumer goods design, development, sourcing and distribution.

Best technical and quality let we can cooperation with most of worlds famous brand . Now Weiwo company have 2 product line one is professional and the other is DIY to fitting all of our customer requirement .The Company specializes in supply chain management of high-volume, time-sensitive goods of all of our customer .

We provide sophisticated, one-stop-shop supply chain solutions to meet customers' specific needs. From product design, raw material sourcing and production management to quality control, logistics, shipping and other important functions, its spectrum of services covers the entire supply chain end-to-end. Over the years, our company has won numerous industry accolades for its performance, governance and sustainability.

The Company is committed to the highest operational standards, conducting its business with integrity and good corporate governance practices with control best quality We believe that make best quality is based on the words "it's just the right thing to do".