1024x600 TFT LCD Panel GG Touch panel Overlay With Aspect Ratio 16:9

Glass on Glass (GG) Touch Screen Overlay with Aspect Ratio 16:9 for 1024x600 TFT-LCD Panel

TPS1018818V1 is a 10.1 inch glass on glass touch screen overlay. The touch sensor is ITO glass bonded with connecting cable. It is COF type with FT5426QDB on it, connecting to the corresponding connector on the mainboard. FT5426QD8 is a single-chip capacitive touch panel controller with built-in enhanced Micro-controller unit (MCU). It provides the benefits of full screen common mode scan technology, fast response time and high level of accuracy. It can drive capacitive type touch panel with up to 28 driving channels and 16 sensing channels.

The other feature of this projected capacitive touch screen overlay is the the outline dimenson is very close to the TFT-LCD panel. The standard one is 1024x600 resolutions. It also works fine on 1920x1080 LCD panel after programming the firmware. It is not designed for flush mounting if water proof is required. Usually, the flush mouting touch has bigger cover glass than the tft-lcd outline dimension.

Specifications:

OD(Outline Dimension):235(L)×143(W)×2.0(T)mm

VA(Viewing Area): 222.72(L)×125.28(W)mm

Cover Glass Thickness: 1.1mm

Sensor Glass Thickness: 0.7mm

Optical Clear Adhesive: 0.2mm

Total Thickness: 2+/-0.2mm

Warranty: 2 years

Description:

1. One of the Disadvantages of Capacitive Touch Screen

Unlike a resistive touchscreen, one cannot use a capacitive touchscreen through most types of electrically insulating material, such as gloves. This disadvantage especially affects usability in consumer electronics, such as touch tablet PCs and capacitive smartphones in cold weather. It can be overcome with a special capacitive stylus, or a special-application glove with an embroidered patch of conductive thread passing through it and contacting the user's fingertip.

2. Providing Touch Panels Since 2009

As a manufacturer, we provide customized touch panels, including 4-wire resistive touch panel, 5-wire resistive touch panel, capacitive touch panel, digital touch panel etc. Mostly, we are able to offer touch panel solutions in a short time.

Currently, we have been supplying touch panels to clients domestic and abroad. Samsung and Nintendo are two well-known companies of them.

3. PRC National Standard High Quality Manufacturer

Audited by TUV, our factory complies with the national standard of high quality manufacturer through the following aspects: genuine manufacturer, dedicated export team, research and development capability, trustworthiness and reputation, high quality products, considerable company size, social and environmental responsibility, customer service capability.

In 2010, we passed ISO 9001:2008 International Management System and ISO 14001:2004 + Cor 1:2009 Environmental Management System.

4. High Stability of Staff Makes High Stability of Quality

Over 60% workshop workers have been working in our company since 3 years ago and it is more than 80% of the management. The philosophy of people-oriented management makes all staff like one.

Additionally, our sales team are able to offer 4 languages service, including Japanese, Korean, English and Chinese. And we are always trying our best to support our clients.

5. Dust-free Workshops and Specialized Equipment

In the line of manufacturing touch panels, dust-free workshops and specialized equipment can basically guarantee the quality, especially the cleanliness of both resistive touch panels and capacitive touch panels.

10000-class dust-free workshops cover an area of over 2000 square meters, in which more than 200 square meters is equipped with100-class dust-free workshops. Moreover, some key equipment is introduced from Taiwan, such as IR ovens, Laser machines, etc.

6. Brand Raw Materials Only

In order to produce satisfactory touch panels, we only use brand materials. In this case, our production has high efficiency.

7. Detail Makes Different

Perfect details make our products perfect. Silkscreen of our analogue resistive touch panels and projected capacitive touch panels has smooth surface, smooth line, uniform thickness and the linearity is below 1.5%; the edge is smooth with tolerance below 0.1mm; minimum width of silver line and distance between lines is 0.15mm.

Silk-printing, laminating, cutting, FPC bonding etc. are all operated by automatic machines and skill-experienced workers. Almost everything is under our control.

8. 100% Inspection

Every stage of production process is focused on a lot to avoid mistakes and regarding the cleanliness of appearance and function, we carry out 100% inspection. What we care most is that each piece touch panel delivered from our warehouse has to meet our clients’ requirements.

9. Safe Packaging and Delivery

Up till now, every order of our touch panels has reached our clients abroad successfully without any damage. We pack touch panels with blister tray or foam box as requested first, certainly, there is a piece of protective film on it; and second, put into a bag and make it vacuum; lastly, put into a carton box.

Established in 2008, Dongguan SHINING Electronic Technology Co., Ltd.(SHINING) , with its subsidiary factory Dongguan CLOUDTOP Electronic Technology Co., Ltd.(CLOUDTOP), is specialized in researching, developing, manufacturing and supplying touch panels, including 4-wire resistive touch panel, 5-wire resistive touch panel, capacitive touch panel, digital touch panel etc., which are widely used in LCD modules for access control, industrial control, house-hold electronics, automotive GPS navigation devices, medical, teaching, office equipment and other products with touch function.

SHINING and CLOUDTOP strictly control touch panels’ quality according to industrial standard and clients’ requirements. We own over 2000 square meters 10,000-class dust-free workshops and more than 200 square meters are equipped with 100-class dust-free workshops, which basically ensures the cleanliness of our touch panels. Regarding our R&D and production ability, we have 12 experienced people in the management and there are more than 50 workers, most of who have been with us for over 3 years. Moreover, in order to guarantee the quality from the start, we only purchase brand materials and some key steps, such as silk-printing, laminating, cutting, FPC bonding etc., are all operated by automatic machine and skill-experienced workers. Additionally, we carry out 100% inspection to make sure that each piece touch panel delivered from warehouse can meet our clients’ requirements.

In 2010, we passed ISO 9001:2008 International Management System and 14001:2004 + Cor 1: 2009 Environmental Management System; In 2013, our touch panels passed REACH 144 inspection; In 2015, audited by TUV, we became PRC national standard high quality manufacturer.

We are proud of our development and our clients, not only because of well-known clients like Samsung and Nintendo, but also because of clients who are not that successful but striving all the time. We hope you will be one of them.

MISSION

Make Better Touch Panels That Know Human Better！

VISION

SHINING Touch, Fulfill Life With Fun！

VALUE

Filial and Respectful； Kind and Friendly；Practical and Striving；

Professional and Persistent；Sanguine and Hopeful