7HH Electrochemistry Hydrogen Sulphide 0-50ppm For Gas Analyzers Hydrogen Sulfide Detector
Model Number:7HH
Minimum Order Quantity:1
Delivery Time:3-5 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Maximum Overload:500ppm
Expected Operating Life:Two years in air
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Room 3306AB 33rd Floor, SEG Plaza,Huaqiang North Road, Futian District, Shenzhen Guangdong Province 518028
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
7HH Electrochemistry Hydrogen Sulphide 0-50ppm For Gas Analyzers Hydrogen Sulfide Detector
IMPORTANT NOTE:
Connection should be made
via PCB sockets only. Soldering to the pins will
render your warranty void.
Cross-sensitivity Data:
CiTiceLs may exhibit a response to certain gases in a sample other
than the target gas. 7HH CiTiceLs have been
tested with a number of commonly cross-interfering gases and the
results are given below. The table shows the typical
response to be expected from a sensor when exposed to a given test
gas concentration (relevant to safety, e.g. TLV
levels).
| Relative Humidity Range | 15 to 90% non-condensing |
| Typical Baseline Range (pure air) | -0.2 to +0.4ppm equivalent |
| Maximum Zero Shift (+20°C to +40°C) | 0.1ppm equivalent |
| Long Term Output Drift | <2% signal loss/month |
| Recommended Load Resistor | 10Ω |
| Bias Voltage | Not required |
| Repeatability | 1% of signal |
| Output Linearity | Linear |
7HH Electrochemistry Hydrogen Sulphide 0-50ppm For Gas Analyzers Hydrogen Sulfide Detector
Inquiry Cart
0