Plastic Entire Sealing Farad Super Capacitor 1.5F 5.5V Supercapacitor For Water Meter

Plastic Entire Sealing Super Capacitor 1.5F 5.5V for Water Meter

The entire sealing super capacitor could meet the use in high-humidity application environment, such as those of water meter. It has the good characteristics of moisture resistance. It passed the high-temperature test and salt spray test. Corroded by moisture and corrosive gas, chemical reaction are easily take place at the ferro-aluminium connection parts of terminal of common super capacitors. This will make the aluminium produce expansion material sand finally lead the super capacitor leakage. In order to prevent this happening, entire sealing super capacitors use resin filling-packaging process to separate the corrosive parts to the outside environment. This will entirely prevent the chemical reaction happening.

Feature:

waterproof, leakage, high capacity, low internal resistance, good consistency

• Type:TMCS01-155Z5.5VB
• Capacitance: 1.5F
• Capacitance Tolerance:-20%~+80%
• Working Voltge:5.5V
• Surge Voltage:6.0V
• Nominal resistance: AC resistance:500mΩ DC resisttance:750mΩ
• Working Tempeture:-40~70℃
• Storage Temperature:-40~85℃
• Max. Peak Current(1s): 1.94mA
• Leakage Current(24h): ≤ 0.02 mA
• Cycle life: Standard charge and discharge mode, the charge and discharge loop 500000 times, |△C/C|≤30%,ESR≤ 4 times initial value(25 ℃)

Standard Test Conditions

In general, samples are tested under the condition of standard atmospheric pressure, the 15 ~ 35 ℃ temperature and 25% ~ 75% relative humidity. Samples should be placed more than 1h under the testing temperature. The test conditions of this specification is for standard atmospheric pressure, temperature of 25 + / - 1 ℃, relative humidity for 60-15%.

Specifications

Environmental Characteristics

Product Dimensions:

Application: Widely used for ammeter, water meter, gas meter, tax machine, solar lamp, electric vehicle, car audio, video, electric tool, wind power generator, and UPS, for Wireless Communications, Buzzers, Toys , Smart power grid, etc

FAQ Of Topmay Capacitor

1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.

2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days

3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs

4) How about price terms?

We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.

5) What information should I let you know if I want to get a quotation?

Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.