FSCUT 1000 Cypcut Laser Controller System For Fiber Laser Cutting Machine
Brand Name:DP LASER
Certification:CE SGS FDA TUV ROHS
Model Number:Laser Control System
Minimum Order Quantity:1 Set
Delivery Time:7-15 Work Days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Room 17-10B, Building 17-19, Building 17-19, Taohuayuan Phase 3, Industrial 8th Road, Yanshan Community, Zhaoshang Street, Nanshan District, Shenzhen
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
FSCUT 1000 Cypcut Fiber Laser Cutting Machine Laser Controller System
Basic introduction
The FSCUT1000S system is a set of low-cost fiber laser cutting solutions tailored on the FSCUT2000C medium-power laser cutting system. The system combines the motion control card and the capacitor height controller into one, and is a special laser cutting system with high cost performance.
Feature
1.Craft
Supports up to two levels of perforation.
Only supports the communication of domestic lasers such as Raycus,
Maxphotonics and Feibo.
Support flying cutting, leapfrog.
Capacitive edge finding is not supported; the expansion board can
support electric focus adjustment and double exchange worktables;
support simple layout.
Advanced processes such as cooling spots, sharp corners, and
release corners are not supported.
2.Control
Track accuracy 0.05mm, positioning accuracy 0.01mm.
Maximum cutting speed 100m/min, maximum idle speed 100m/min.
Maximum acceleration 1G.
Does not support dual-drive error alarm and pitch compensation
functions.
The origin signal is not supported, only the limit signal is
sampled when returning to the origin.
Applicable Industries
It is suitable for low-power fiber laser cutting machines within 1500W, and is widely used in laser processing equipment for thin metals such as the advertising industry.
| FSCUT 1000 |
Specification
| Adaptation software | CypOne Laser Cutting Software |
| Control card | BMC1603 |
| Interface Type | 32-bit PCI bus, 132MB/s |
| Terminal board | BCL4562 |
| Power Requirements | 24V DC/2A |
| Motor control signal | X/Y1/Y2 axis pulse output, maximum frequency 3MHz Z axis analog output, -10~+10V X, Y1, Z axis with encoder input interface, the highest sampling frequency 10MHz |
| Dedicated output | 2-channel DA: 0~10V, 50mA 1 channel PWM: 5V/24V optional, accuracy 5KHz (0.1%) |
| Dedicated input | 6-way limit: X/Y1/Z 3-axis positive and negative limit |
| Universal input | 6 channels: active low, support normally open, normally closed |
| Universal output | 8 channels: relay output, 30V DC/5A |
| Working environment | Temperature: 0~55℃ Humidity 5%~95% (non-condensing) |
FSCUT 1000 Cypcut Laser Controller System For Fiber Laser Cutting Machine
Inquiry Cart
0