

Add to Cart
Jiangsu Shenghuang New Energy Technology Co..Ltd. is located in Wuxi Liangxi district Jinshan North science and Technology Industrial Park, is a factory commitment to wind generators, solar monitoring system, wind and solar complementary monitoring system, photovoltaic system, wind and solar complementary controller,inverter,Gel battery, Lithium Battery Development and integrated application of green energy saving and environmental protection technology enterprises.
Supporting battery type: lead-acid, gel battery, ternary lithium battery, lithium iron phosphate battery
1.Features
● Aluminum housing for better cooling, IP67 protection
● Over charge protection, electronic short circuit protection.
● The controller has high temperature protection function
● Indicator lights indicate the states of the system.
● Boost charging function. It can charging in the breeze.
2.Safety Information
1.Please do not immerse the controller in the corrosive liquid,
which will damage the controller and produce harmful gas.
2.While connecting the system, the voltage may exceed human safety
voltage, please use insulation tools, and keep your hands dry.
3.If battery is connected reversely, that will damage the
controller’s fuse. Please avoid reverse the battery.
4.Battery storage a lot of energy, if battery is short circuited,
that will be danger. It is recommended to connect fuse in series to
prevent short circuit protection.
5.The battery may produce flammable gas, please stay away from the
spark.
Please according to the following wiring
1.Connect the battery. From right to left, the fourth red cable
connect positive pole of battery, the fifth black cable connect
negative pole of battery.
2.Connect the wind generator. From right, the first, second and
third green wires connect wind generator.
=
System voltage | DC12V/24V/48V |
Quiescent power drain | ≤15mA |
Max wind input power | 12V 300W,24V 600W,48V 800W |
Wind start charging voltage | 6V,12V,24V |
Working temperature | -35℃ ~ 70℃ |
Over temperature voltage | 14.4V/28.8V/58.6V |
Over temperature recovery voltage | 13.6V/27.6V/57.4V |
Shell material | Aluminum |
Water proof grade | IP67 |
Suitable battery | Lead acid battery / Gel battery/ Lithium battery |
Q and A
Q1:Can MPPT be used for wind turbines?
A1: Solar charge controllers cannot be used for wind turbines, although both energy sources use the same type of controller, PWM and MPPT.
Q2:Why do wind turbines need to be unloaded?
A2: What is offloading/unloading? When your battery is full, you need to divert the excess power generated to a separate load so your wind turbine doesn't spin at high speeds in high winds. This is where dump loads (also known as divert loads) come from.
Q3: How to do wind control?
A3: These data machines also consist of a number of computers, motors that continuously monitor and run statistical machines, and collected information. As the name implies, the controller controls and operates a large number of switches, hydraulic pumps and operations within its machine.