SMD 25mm Rubber Flat Gasket Silicone Ring Type Surface Mount Technology
Brand Name:PAN
Certification:SGS,ROHS,CCC
Model Number:PAN-10-7
Minimum Order Quantity:10000
Delivery Time:7~14 workdays
Payment Terms:T/T, Western Union, MoneyGram, L/C, D/A, D/P
Contact Now
Add to Cart
Active Member
Location:
Qingdao China
Address:
NO.8 LONGZE ROAD, CHENGYANG DISTRICT,QINGDAO
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
SMD Gasket,WHL303025 Surface Mount Technology, Elastic
Recovery,Electricity Production
1. WHL: 301540
2. Product Characteristic
SMD GASKET is a surface mount technology utilizes surface mounter (
SMD M/C) PCB mounting and is available as a ground terminal and the
mount an electric/electronic devices,and EMI noise reduction
products. SMD GASKET is suitable for the required flexibility,
elastic recovery, heat resistance and electrical conductivity
tanwol products.
3. Material and Finish
| NO | ITEM | Material | Plating |
| 1 | Silicone | Silicone | |
| 2 | PI Film | Sn plating |
PRESS | NO BURR |
| PLATING | NO Discoloration |
| Contact Resistance | 50mΩ (Max.) |
| After the test | 100mΩ (Max.) |
4 Drawing
5 Packaging Management Table
Check List | - It must be attached on REEL and Vinyl bag . | 0 |
MSL SPEC attach (MSL: MOISTURE SENSITIVE LEVEL) | - It must be attached on REEL and Vinyl bag . | |
Lead Free Mark attach | It must be attached on REEL and Vinyl bag . | |
Keep Dry" LABEL attach | - The label of "Keep Dry" must be attached on the product which is under MSL 1 | |
Packaging Specification | - Should be applied at least MSL 2. - The material of REEL should be plastic. (Don't use paper REEL.) | |
REEL sealed package | - Must be sealed. | |
REEL COVER TAPE compression method | Use a heat compression method | |
Packing flow | Reel →Put in the silica gel → Seal the bag→ OUT BOX |
Packing Spec
(1) Moisture Sensitivity Level : MSL-1
(2) Carrier Tape Compression Method : Heat Compression Method
(3) Desiccant Spec : Silica Gel
(4) Static Electricity Production Max. 100V
(5) Reel materials will have to apply a plastic type quality of
material
1.Prepare the upper and lower gold-plated compressed
2.Product Total Height: 30% compression
Adhesion Method
Test Method
1. prepare the pcb Solder product
2 .push product total height 50%
3. Measurement Speed:0.5mm/sec
Conductive metal layer on the silicone rubber surface
· Innovative product with soft silicone rubber properties and conductive metal properties at the same time.
· Improved EMI shielding and grounding performance due to thicker conductive surface layer.
· Improved corrosion resistance and reliability by not exposing the
copper layer to outside air.
Easy to adjust product softness
· Adjusting the hollow size and shape to soften the gasket minimizes stress on and improves adhesion to PCB.
· Metal surface layer is possible even when the silicone rubber core is thin, improving the disadvantage of its hardness when the silicone rubber is thick.
· Easy to adjust the shape, number, and thickness of the core
hollow.
SMD 25mm Rubber Flat Gasket Silicone Ring Type Surface Mount Technology
Inquiry Cart
0