SUS Immersible Submersible Ultrasonic Transducer 40khz 1200W

40khz FUYANG Custom Submersible Transducer Ultrasonic Cleaner For Car Parts

Product Description

Suggested Ultrasonic Cleaning Procedure

In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.

Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:

• Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
• Instruments with movable parts should be disassembled to facilitate cleaning
• Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
• Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
• Set the control panel per manufacturers’ instructions and start the cleaning process

At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.

Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. many solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.

The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.

Shenzhen Fuyang Technology Group Co., Ltd. is a comprehensive technology company integrating design, research and development, production and sales. It was officially registered and established in 2019. The company was formerly known as Shenzhen Xinkaida Electronics Co., Ltd. Founded in 1993, it is a R&D and manufacturing enterprise focusing on ultrasonic cleaning machines, with a history of 27 years. In addition, Fuyang Group also has four subsidiaries including Shenzhen Yujie Cleaning Equipment Co., Ltd., Shenzhen Fuyang Acoustic Technology Co., Ltd., Shenzhen Artz Technology Co., Ltd., and Suzhou Maihong Electric Co., Ltd., which are ultrasonic cleaning machines. And other types of business to provide sales and after-sales service.

Over the years, with the continuous exploration and pursuit of ultrasonic cleaning, Fuyang ultrasonic cleaning equipment has been widely used in various scenarios, solved the cleaning pain points of many industries, and accumulated valuable R&D technology and brand reputation. The products have been sold in more than 100 countries and regions at home and abroad, and this number will continue to expand in the future.