Epoxy Resin Crystal Clear Bulk Kit Art Resin for Craft Tumblers Tabletop Molds Pigment River Tables
Brand Name:Aorun
Model Number:Aorun 5110
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Place of Origin:Chongqing, China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Epoxy Resin Crystal Clear Bulk Kit Art Resin for Craft Tumblers Tabletop Molds Pigment River Tables
Quick Detail:
| Name | Art resin5110 | Usage | Construction, Woodworking, DIY Crafts Epoxy |
Mixing Ratio | Two Components Liquid, 1:1 | Advantage | Low heat,no odor,self-defoaming,High Temperature Resistance, High Gloss |
Description:
1. 5110 Epoxy Resin is a clear epoxy resin that cures at normal and
low temperatures.
2. It has good alignment, natural foam, low viscosity, high
hardness and high strength.
3. It can be cured at room temperature or by heating. It is for
crystal board, marble board, 3D floor insulation, metal floor,
kitchen table top, resin coating, high hardness coating on any
surface; and other electronic parts, waterproof filling, secret
masking, etc.
4. Normal condition can be reached 5-7 years against yellow.
5. The maximum thickness of a pot can reach 5-7cm.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Note:
1. This product is a special large pouring glue for river tables.
It will dry slowly in the production of thin layers
2, low temperature will lead to slow curing or even stop curing,
low temperature environment application using high transparent low
temperature curing adhesive
3, the bonding surface should be dust removal, oil removal, keep
the surface clean and dry
4, the construction proportion must be accurate, improper
proportion will lead to the colloid does not cure or cure is
incomplete
5, AB glue must be kept sealed and pollution-free. After taking the
glue, the container cover should be tightened as soon as possible
to avoid dampness
6. When stirring, try to stir gently in one direction to avoid too
many bubbles. When pouring, it should also be soft and light
7. It is recommended to use a vacuum defoaming machine, which has
the best effect. Flame gun or hot air gun can only eliminate the
bubbles within 0.5cm of the surface
8, should be in the ventilated environment construction,
construction should wear gloves, masks, protective goggles and
other protective measures
9. Do not take it. If it gets into eyes or mouth by accident, rinse
immediately with plenty of water and seek medical advice
10. Use with caution if allergic to resin
11, the uncured glue can be cleaned with water and acetone. The
cured glue can only be removed by mechanical method. If it
accidentally contacts the skin, it can be cleaned with warm water
and washing powder.
Precautions:
1. Please clearly check the label on the package before matching
the glue, and confirm the ratio of the ratio of the A agent to the
B agent.
2. The glue tool should be clean and dry, no dust, water and oil.
3. Mix the A and B components according to the proportion and stir
evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of
glue is, the more heat is generated, and the curing time is also
shortened. The shorter the time that can be used, so please apply
the proper amount of glue according to the time of filling. So as
not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent
debris or moisture absorption, and ensure the normal use of the
next time.
6. A very small number of people exposed to the glue for a long
time will produce mild skin allergies, it is recommended to wear
protective gloves when used, stick to the skin can be wiped off
with Tianna water or alcohol, and cleaned with detergent.
7. Before mass use, please try a small amount, master the use of
the product skills, so as not to make mistakes.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Epoxy Resin Crystal Clear Bulk Kit Art Resin for Craft Tumblers Tabletop Molds Pigment River Tables
Inquiry Cart
0