Hard Wood Waterproof Epoxy AB Resin High Hardness Crystal Clear
Brand Name:Aorun
Model Number:Aorun X722
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Place of Origin:Chongqing, China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Resin Clear Hard Wood Table Crystal Ab Glue Hardener Art Crafts Epoxy Resin With Good Hardness Clearness
Quick Detail:
| Name | Art resinX722 | Product Type | Epoxy AB Resin |
Mixing Ratio | 2:1 | Usage | Construction, Fiber & Garment, Footwear & Leather, Packing |
Features:
1.Can be cured at room temperature or by heat curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.No bubbles
5.Good transparency and excellent surface gloss
6.Can polish after drying
7.High hardness
8.With high gloss as a mirror
Application:
Aorun X722 can be widely used for drops ofglue
signscardscraftslighting photo frame, lamp potting and mold
filling, etc.
For Casting crafts, jewelry, tray, coaster; Wood table top coating,
tumbler coating; Wall art print and so on.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
How to do:
MEASURING
With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cup to make sure you are mixing it well.
TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.
MIXING
Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.
POURING
After making sure your piece is level, go ahead and pour AmazingResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.
TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.
WAIT AmazingResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.
Note:
1. This product is a special large pouring glue for river tables.
It will dry slowly in the production of thin layers
2. low temperature will lead to slow curing or even stop curing,
low temperature environment application using high transparent low
temperature curing adhesive
3. the bonding surface should be dust removal, oil removal, keep
the surface clean and dry
4. the construction proportion must be accurate, improper
proportion will lead to the colloid does not cure or cure is
incomplete
5. AB glue must be kept sealed and pollution-free. After taking the
glue, the container cover should be tightened as soon as possible
to avoid dampness
6. When stirring, try to stir gently in one direction to avoid too
many bubbles. When pouring, it should also be soft and light
7. It is recommended to use a vacuum defoaming machine, which has
the best effect. Flame gun or hot air gun can only eliminate the
bubbles within 0.5cm of the surface
8. should be in the ventilated environment construction,
construction should wear gloves, masks, protective goggles and
other protective measures
9. Do not take it. If it gets into eyes or mouth by accident, rinse
immediately with plenty of water and seek medical advice
10. Use with caution if allergic to resin
11. the uncured glue can be cleaned with water and acetone. The
cured glue can only be removed by mechanical method. If it
accidentally contacts the skin, it can be cleaned with warm water
and washing powder.
How to Choose Product Model:
Aorun epoxy resin is suitable for machinery, petrochemical,
vehicle, electronic products, electrical equipment, construction,
decoration, special purpose and other industries, especially for
special purpose and multiple purposes.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Hard Wood Waterproof Epoxy AB Resin High Hardness Crystal Clear
Inquiry Cart
0