Premium Anti Corrosive Paint Heat Absorbing Acrylic Exterior Wall Thermal
Brand Name:Aorun
Model Number:Aorun 9451
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Premium Anti Corrosive Heat Absorbing Acrylic Exterior Wall Thermal Paint
Quick Detail:
| Name | Art resin 9451 | Usage | Appliance Paint, Boat Paint, Car Paint, Plastic Coating |
| Type | BPA | Function | Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless |
Description:
9451 pool anticorrosive paint is used as topcoat or intermediate
layer for steel objects and cement and concrete. It has excellent
water resistance, ozone oxidation resistance and chemical
penetration resistance, high adhesion and mechanical strength, both
ideal corrosion resistance and Certainly decorative.
Construction parameters: dry film thickness up to 300 microns
Mixing ratio: A: B = 3: 1 (weight ratio)
Drying time: surface dry 2h hard dry 24h
Overcoating interval: minimum 24 hours, maximum 7 days
Storage notice:
Storage: this product should be stored in shady, dry, and ventilated warehouse and storage temperature 5-40℃ is appropriate. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Advantages:
Our main products are Floor Paint, Stone Paint,Interior/Exterior
Wall Emulsion Paint, Granite Paint, Texture Paint, Rock Chip Paint,
Metal Paint, Waterproof Paint,Relief Paint,Varnish etc..
We can manufacture high quality building paint, Choosing national
standard eco-friend material.
Certifications: ISO9001. SGS, CCC.
Checking in every production processes with modern testing
equipments to insure reliable performance of products.
Providing thoughtful innovations and inspirational designs for
products.
We have a perfect sales service team, our professional technician
can solve your problems.
We accept color customization and OEM services.
Specification:
Items | Units/conditions | Technical Data |
Viscosity | Shore-D | 80-85 |
Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
Surface resistivity | 25℃/ Ω. | 2.6x1014 |
Dielectric strength | 25℃ KV/MM | 25 |
Coefficient of linear expansion | CM/K | <6.1x10-5 |
Glass transition temperature | ℃ | >90 |
Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A,
B components are strictly according to the weight ratio, accurately
weighed, and stirit evenly along the inner wall of the container
clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment,
to avoid waste. When the temperature is lower than 15 ° C, please
pre-heat the A glue to 30 ° C and then adjust the rubber, easy to
operate (low temperature, A glue will thicken ); After use must
seal the lid,to avoid the product due to moisture absorption
scrapped.
3. When the relative humidity is more than 85%, the surface of the
cured product can easily absorb the moisture in the air to form a
whitemist.Therefore,when the relative humidity is more than 85%, it
is not suitable for room temperature curing. It is recommended to
use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
NOTE:
1. Cleanses main films, and dry, dry before spraying and dry. (Udo
Abrodraping600 # -800 #, dry abrodrad400 # -600 #)
2. The temperatures are more than 30 ° 100, to be more sensitive to
the correct size of button to be thinner and with silver powder
paint.
3. Sprinkle tools, technology methods, technology methods,
technology methods, technology has been expressed. Otherwise the
metal paint layer will swim and have weak metal emotions.
4. Hours of time to buy users or more than 25. Otherwise the nearby
card between paved layers is not strong.
5. The spraying after each layer will be sprayed after the metallic
paint. If there are any dust spots or particles on the surface
paint, clean it with a fixed cloth.
More than ASAP from ASAP on ASAP on ASAP for 6K-based paint. If the
time is too long it will affect adhesive.
FAQ:
Q1:How could I get a sample?
Before we received the first order, please afford the sample cost
and express fee. We will return the sample cost back to you within
your first order.
Q2: Are you a trading company or a factory?
We are a manufacturer with nearly 20 years of experience in the
production of waterborne coatings.We are a high-tech chemical
enterprise based on high-tech, engaged in paint coating development
and production, the company has a number of high-quality scientific
research.
Q3:Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages
if you can meet our MOQ.
Q4:Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our
MOQ.
Q5: How to guarantee the quality of your products?
1) Strict detection during production.
2) Strict sampling inspection on products before shipment and
intact product packaging ensured.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Company Display:
Premium Anti Corrosive Paint Heat Absorbing Acrylic Exterior Wall Thermal
Inquiry Cart
0