4040 40mm CNC Aluminium Profile Frame Aluminium Heat Sink Extrusion

Low 4040 40mm Extrusion Heat Sink Aluminum Extruded CNC Aluminium Profile With Wholesale Price

Basic Information

Product Display

A common surface treatment, anodizing is a protective oxide layer that naturally forms on aluminum surfaces when exposed to air. During manual machining, aluminum parts are suspended from conductive supports and immersed in an electrolytic solution in which direct current is introduced. As the acidity of the solution dissolves the naturally formed oxide layer, the electrical current releases oxygen on its surface, creating a new protective layer of aluminum oxide.

By balancing the dissolution rate and accumulation rate, the oxide layer forms nanopores, allowing the coating to continue to grow beyond what is naturally possible. Later, for aesthetics, the nanopores are sometimes filled with other corrosion inhibitors or colored dyes, and then sealed to complete the protective coating.

Aluminum Processing Tips

1. If the workpiece overheats during machining, the high coefficient of thermal expansion of aluminum can affect tolerances, especially for thin parts. To prevent any negative effects, heat concentration can be avoided by creating tool paths that are not concentrated in one area for too long. This method dissipates heat, and toolpaths can be viewed and modified in the CAM software that generates the CNC machining program.

2. The softness of some aluminum alloys can promote deformation during processing if the force is too high. Therefore, specific grades of aluminum are machined at the recommended feeds and speeds to generate the proper forces during machining. Another rule of thumb to prevent deformation is to keep the part thickness greater than 0.020 inches in all areas.

3. Another effect of aluminum's ductility is that it can create a combined edge of material on the tool. This masks the sharp cutting surface of the tool, dulls the tool, and reduces its cutting efficiency. This build-up edge also creates a poor surface finish on the part. To avoid accumulating built-up edges, experiment with the tool material; try carbide inserts instead of HSS (high speed steel) or vice versa, and adjust the cutting speed. You can also try adjusting the amount and type of cutting fluid.

Certificates and Honors



Factory display





Company Profile

Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!

FAQ

Q: Can you send me the product catalog and price?
A: Leave your e-mail or other contact information, the product catalog will be provided here
The real-time price needs to confirm the specific product specifications and quantity, so the price can be calculated for you only when you provide drawings or plans, etc.

Q: Do you provide samples?
A: Yes (special customized samples need to provide drawings).

Jiangyin Longkang Metal Products Co., Ltd. is the holding company of Wuxi High Mountain Hi-Tech Development Co., Ltd. It is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!