Name: power supply for led strip ws2801
Brand: BTB

Quick Details

Place of Origin: Guangdong, China (Mainland)
Brand Name: BTB
Model Number: BTB-15-12
Output Power: 51 - 100W
Output Type: Single
Input Voltage: 220V
Output Voltage: 12v 5v 24v 48v
Output Frequency: 50/60hz
Output Current: 1a-40a
used: CCTV CAMERA,battery
warranty: 3years
colore: slivery
port: single, dual,third,Four
certificate: CE FCC Rohs
protection: short Circuit/overcurrent/overload protection
Packing: Paper box or OEM box
Protection: OVE ,OPP, SCP
Working termpreture: -5° ~ 60C°
Mterial: aluminum

Packaging & Delivery

Packaging Details:	Paper box or OEM colore box
Delivery Detail:	7-10day

Specifications

Switching power supply
Input : 85-264VAC
warranty:3years
welcome to OEM/ODM
CE FCC SAA RoHs

nutribullet 600w 220Volt supply

15W 12V High Qualiaty/Low Cost/Small Size/PowerSupply/ac/dc switching powersupply/Single output switch powersupply

110V 220V Input Voltage and 60W Output Power lab power supply

MODEL		BTB0000
OUTPUT	DC VOLTAGE	12V 5V 15V 24V 48V
	RATED CURRENT	1A -50A
	CURRENT RANGE	0 ~ 1.3A
	RATED POWER	1-1000w
	RIPPLE & NOISE (max.) Note.2	120mVp-p
	VOLTAGE ADJ. RANGE	10.8~13.2V
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINE REGULATION Note.4	±0.5%
	LOAD REGULATION Note.5	±0.5%
	SETUP, RISE TIME	1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
	HOLD UP TIME (TYP.)	70ms/230VAC 12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85~264VAC 120~370VDC
	FREQUENCY RANGE	47~63HZ
	EFFICIENCY (Typ.)	81%
	AC CURRENT	0.35A/115VAC 0.25A/230VAC
	INRUSH CURRENT (max.)	COLD START 65A/230VAC
	LEAKAGE CURRENT	Less than 2mA/240VAC
PROTECTION	OVER LOAD	Above 105% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	13.8 ~ 16.2V
	OVER VOLTAGE	Protection type : Shut off o/p voltage, clamping by zener diode
	OVER TEMPERATURE	U1 Tj 140°C typically (U1) detect on main control IC
	OVER TEMPERATURE	Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20~+70°C (Refer to “Derating Curve”)
	WORKING HUMIDITY	20~90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40~+85°C 10~95%RH
	TEMP. COEFFICIENT	±0.03%(0~50°C)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY&EMC	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-1, light industry level, criteria A
QTHERS	MTBF	1608.8Khrs min. MIL-HDBK-217F (25°C)
	DIMENSION	62.55128mm (LWH)
	PACKING	0.13Kg; 108pcs/15Kg/0.71CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

1. We sell 100% original material power supply , and have the certificate of UL, CUL, CE, CB, RoHS etc.

1.Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via Tel or mail.

2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.

3.The stock info will be informed before your order, to make everything under control.

4.We will quote to you competitive prices according to your quantities.

5.Price could be negotiated for more and large quantity.

6.We have a technical team, if you show us your LED information, we can find right drivers for you to match LED.

Switching power supply Shipping & Duties:

Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.

Switching power supply Payment:

To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL, More payment options will be added in the near future.

Switxhing power supply After-sale service:

All of the products we sell are with a certain time warranty.

during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.

We will be very glad to provide the assistance during your installation and application at any time.

Swtching power supply pls Contact BTB Co.'ltd:

Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.

We will always be here and try our best to provide you our best service !

Waiting for your kind inquiry !