Light Emitting Diode Power Supply Burn In Test Facility For Rectifier Power Supply
Brand Name:CPET
Model Number:CP-300204
Minimum Order Quantity:2sets
Delivery Time:35 work days
Payment Terms:L/C
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Building 1, No. 33, Patang Road, Loucun Community, Guangming District, Shenzhen, China XinHu Street,Guangming District, Shenzhen, China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Light Emitting Diode Power Supply Burn-In Test Facility For Rectifier Power Supply
Outstanding functions
1. Be of five kinds of load modes such as CC, CV, CR, CP and LED
2. Be of built-in over-temperature and smoke-alarming automatic
protection device
3. Cooperate with monitoring software of power burn-in, for
application
4. Be of optional multiple laminate structures at products zone and
meet the requirements for more convenient operation of different
products
5. Be of automatic voltage switching function (optional)
Performance parameters
| 1 | Introduction to the appearance and structure of the power aging trolley: | |
| A | Car size (mm) : | L2050*W880*H1900 |
| B | Number of car layers: | 6 |
| C | Height of truck/Width: | 170mm/320mm |
| D | Car structure material | Cold-rolled sheet |
| E | Load area heat dissipation mode: | The top turbine exhaust fan is up-row (easy to control the ring temperature), the load area is isolated from the product area, and the cold and hot air Track isolation |
| F | Interlayer insulation and anti-static mode: | Epoxy insulating board with heat dissipation holes on the surface |
| G | Laminate structure form: | 4, 5 layers can be turned over to facilitate the bottom operation |
| H | Aluminum alloy visual sliding door structure: | Product area closed, folding double-layer hollow glass door |
| I | Others: | Lighting is installed in the product area of aging cabinet for easy operation |
| 2 | Electronic load module configuration, measured power and aging quantity: | |
| A | Electronic load module control mode: | RS485 communication mode, host computer RS232 communication mode |
| B | Install electronic load module Model: | CP8103 (2-500V,0.05-10A/CH) |
| C | Electronic load module isolation mode: | Electronic load module channel adopts photoelectric isolation (communication and power supply isolation) |
| D | Number of installed electronic load modules: | Load area installed 8 units per layer, a total of 6 layers, the vehicle installed 48 units |
| E | Electronic load loading mode: | CC/CV/CR/CP/LED mode, any mode can be used in parallel channels |
| F | Electronic load design architecture: | No electrolytic capacitor, no relay, long life design scheme (independent intellectual property rights) |
| G | Number of electronic load module channels: | 4CH (Four channels) This solution is configured in parallel with two channels |
| H | Single pass rated power of load module: | 250W/CH The power of the measured single-channel power supply is less than 250W |
| I | Number of vehicle aging products: | Power supply below 250W 96 bits |
| J | Number of parallel dual-channel aging products: | Dual channel parallel aging 48 power supplies below 500W (Support channel parallel use in any mode) |
| 3 | Electric control and temperature control device of power aging trolley: | |
| A | Connection mode: | AC input end is card socket; DC adapter board DC head + speaker clip + parallel switch |
| B | Panel function keys: | Input AC voltage display, start switch, emergency stop switch |
| C | Product area temperature control accuracy: | Temperature control range: room temperature to 55℃, ±5℃ |
| D | Product area temperature control principle: | Low temperature heating, over temperature exhaust |
| E | Trolley power distribution and control mode: | 380V three-phase five-wire distribution; Computer monitoring and manual electric control |
| F | Trolley power distribution: | 250W*96 units /0.80≒30.0KW, the measured power efficiency is calculated as 80% |
| G | Control mode: | Electric control includes manual/automatic switching; 150KVA transformer, input 380V, output 110V/220V/264V /380V four kinds of voltage; Control 4 aging cabinets at the same time |
| H | Heat preservation device: | The product area is equipped with aluminum alloy frame tempered glass doors and air ducts on both sides |
| I | Security protection: | Equipment grounding protection, leakage switch protection, smoke alarm automatic power off protection, etc |
Light Emitting Diode Power Supply Burn In Test Facility For Rectifier Power Supply
Inquiry Cart
0