High-Index Reflective Thermoplastic Road Marking Paint Powder Coating With Glass Beads Mainly Resin Product
Brand Name:HUA QUN
Certification:ISO9001
Model Number:HQ-223
Minimum Order Quantity:1 ton
Delivery Time:3-7work days
Payment Terms:L/C,T/T,Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou China
Address:
Room 522, Scientific Research Office Building,63 Punan Road,Huangpu District,Guangzhou,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
High-Index Reflective Thermoplastic Road Marking Paint Powder Coating with Glass Beads Mainly Resin Product
Product Description
Thermoplastic paint is a type of durable, heat-applied coating
commonly used for road markings, traffic signs, and other outdoor
applications. It’s made from a mixture of synthetic resins,
pigments, glass beads (for reflectivity), and fillers that solidify
when cooled after being heated to a molten state. Unlike regular
paint, which dries through solvent evaporation, thermoplastic paint
is applied in a hot, liquid form (typically at temperatures between
180°C and 220°C or 356°F to 428°F) and hardens as it cools, forming
a thick, tough layer that bonds well to surfaces like asphalt or
concrete.
It’s popular for its longevity, weather resistance, and ability to
withstand heavy traffic. The glass beads embedded in it enhance
visibility at night by reflecting light from vehicle headlights.
You’ll see it in things like lane lines, crosswalks, or parking lot
markings. There are two main types: hydrocarbon-based (derived from
petroleum) and alkyd-based (made from natural oils), with the
former being more common due to cost and performance.
Specification
| Gravity(g/㎥) | 2.1g/㎥ |
| Color | Yellow, Orange, Red and etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point(℃) | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks,fall-out&stick tyres |
| Drying Time(min) | Within 3 minutes |
| Chroma Performance | Reverse materials(white) |
| Compressive Strength(Mpa) | 26 |
| Abrasive Resistance(mg) | 42 |
| Alkali Resistance | Great (in saturated solution of calcium hydroxide for 24 hours |
| Glass Beads(%) | 19% |
| Fluidity(s) | 40s |
| Coating Resistance | Resis -10℃ for 4 hours |
| Package | 25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons |
| Heat Resistance | Under 200℃-220℃ for hours |
| Material | C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on. |
| Application | Road marking, straight line, dotted line, curve, oriented arrow,letter and etc. |
| Water Resistance | Great (in water for 24 hours) |
Steps to Use Thermoplastic Paint:
- Surface Preparation:
- Clean the surface thoroughly to remove dirt, dust, oil, or loose debris. Use a broom, wire brush, or pressure washer as needed.
- Ensure the surface is dry, as moisture can prevent proper adhesion.
- For porous surfaces like concrete, you may need to apply a primer to enhance bonding. Check the manufacturer’s instructions.
- Heat the Thermoplastic:
- Load the thermoplastic material into a preheater or melting kettle.
- Heat it to the recommended temperature, typically between 180°C and 220°C (356°F to 428°F), depending on the specific product. Stir occasionally to ensure even melting and to avoid scorching.
- Monitor the temperature carefully—overheating can degrade the material.
- Test the Consistency:
- The molten thermoplastic should have a smooth, liquid consistency, free of lumps. If it’s too thick, it won’t apply evenly; if too thin, it may not set properly.
- Apply the Paint:
- For Road Markings: Use a striping machine or screed box to pour the molten thermoplastic onto the surface in the desired pattern. Work quickly, as it begins to cool and harden once applied.
- For Smaller Areas: Use a hand-held applicator or trowel to spread the material evenly.
- Maintain a consistent thickness (usually 1.5–3 mm, depending on the project requirements).
- Add Glass Beads (Optional):
- For reflective markings (e.g., road lines), sprinkle glass beads over the wet thermoplastic immediately after application. The beads will embed as it cools, improving visibility.
- Cooling and Setting:
- Allow the thermoplastic to cool and harden naturally. This typically takes 5–15 minutes, depending on the ambient temperature and thickness. Avoid disturbing the area during this time.
- Clean Up:
- Clean your equipment while the thermoplastic is still warm using a scraper and solvent (if recommended by the manufacturer). Once it hardens, removal becomes much harder.
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
High-Index Reflective Thermoplastic Road Marking Paint Powder Coating With Glass Beads Mainly Resin Product
Inquiry Cart
0