120V Vertical Sewage Pump Cast Iron Submersible Pump Explosion Proof

LWB explosion-proof vertical sewage pump is a sewage pump equipped with an explosion-proof motor, which is produced based on our company's original LW vertical sewage pump and according to the customer's application requirements.

1. This sewage pump is a single-suction volute pump. It is equipped with a non-clogging and anti-winding single (double) large-channel impeller with good
passing capacity. The large-channel anti-clogging hydraulic component design greatly improves the dirt passing capacity, and can effectively pass fibrous materials 5 times the pump diameter and solid particles with a diameter of about 50% of the pump diameter.
2. This series of pumps has two structural forms, one is that the motor and the pump are directly coaxial, and the other is connected by a coupling. The motor adopts a standard vertical motor. The pump structure is reasonably designed, equipped with a YX series motor, high efficiency, and energy saving*.
3. The mechanical seal adopts a double-end face series seal, made of hard and corrosion-resistant tungsten carbide, which is durable and wear-resistant, and can make the pump run safely and continuously for more than 8,000 hours.
4. The pump has a compact structure, small size, easy movement, and simple installation.

5. The inlet and outlet installation methods of LWB explosion-proof vertical sewage pump can be placed in 0, 90, 180, 270 according to the customer's pipeline conditions, which is convenient for pipeline connection and can be flexibly arranged according to site requirements.

6. The inlet and outlet diameters of LWB explosion-proof vertical sewage pump are the same, and the diameters can be DN25-DN300 respectively.

7. LWB explosion-proof vertical sewage pump is usually made of cast iron, and can also be customized with various grades of stainless steel materials according to the medium requirements, such as: 201.304.316.316L or other special materials.

1. The medium temperature shall not exceed +40℃, intermittent use (maximum 5 minutes) shall be +70℃, the density shall be 1.0～1.3kg/dm3, and the pH value shall be within the range of 5～9.
2. For pumps without internal gravity circulation cooling system, the motor part shall not exceed 1/2 of the liquid surface.
3. In general, the pump must be used within the use head range to ensure that the motor is not overloaded. If it is required to be used within the full head range, it should be specified separately when ordering so that the manufacturer can manufacture it.
4. During operation, the motor current shall not exceed the rated current of the motor.

Denor Fluid Equipment (Wuhan) Co., Ltd. is a reputable manufacturer and supplier of fluid equipment for water systems. The company has incorporated advanced fluid production technology and processes from Germany. Since its establishment, Denor has upheld its core values of morality, integrity, and mutually beneficial development. The company places great emphasis on branding and integrity, and has made significant contributions to the water supply and drainage industry.

Denor has obtained various certifications, including ISO9001 for quality management, OHSAS18001 for occupational health and safety management, and ISO14001 for environmental management. The company offers a wide range of products, such as prefabricated pumping stations, integrated water treatment pump stations, sewage lifting equipment, oil and water separators, smash type grilles, and no negative pressure complete sets of water supply equipment.

With over 50 patents, Denor was recognized as a national high-tech enterprise in 2018. Denor takes great care in every aspect of product production to ensure the optimal performance of its equipment. The company is committed to providing high-quality products and excellent after-sales service to meet customer needs and provide comprehensive solutions for water systems. Denor is dedicated to producing responsible products and being a socially responsible enterprise.